User Manual

BSS C ONFIGURATION AND U SER G UIDE
Page 34 Commercial in Confidence © VNL
®
2010-2011, All rights reserved
Name Description Values
OAM sets this parameters to false
before it triggers platform to initiate a
reboot of BSS. This is a read-only field.
_Reset/active
_ICC_Card_S
hutdown/Stan
dby_ICC_Car
d_Shutdown
Enable GPRS Defines whether BSS is supporting
GPRS service or not. If set to false, Gb
interface and PS cells cannot be
provisioned.
false/true
Enable Call
Re-Est
Indicates that the call reestablishment
is allowed or not.
allowed,
not_Allowed
Enable IMSI
Attach/Detach
Indicates whether attach-detach is
allowed.
allowed/not_
Allowed
Timer T3212 Indicates the T3212 timeout value field.
It is coded as the binary representation
of the timeout value for periodic
location updating. Its unit is deci-hours.
The value 0 is used for infinite timeout
value that is periodic updating cannot
be used within the cell.
0 to 255
MCC Refers to the mobile country code. 0 to 9
MNC Refers to the mobile network code. If 2-digit MNC
is used : 00F-
99F; if 3-digit
MNC is used:
000-999