User Manual

BSS C ONFIGURATION AND U SER G UIDE

Page 40 Commercial in Confidence © VNL

4.3 Setting Administrative State of BSC

There are different administrative states of BSC that you can

set based on your requirement. For example, modifying the

fields of BSC requires that the administrative state of BSC

should be locked.

Follow the below steps to perform any administrative action

or to change administrative state of BSC:

1. Open the BSS node in the modify mode.

2. Expand BSC and right-click BSC: <IP address>.

3. Select Actions and click the desired option.

A dialog box appears based on the selection. For example,

the lock dialog box is shown below:

4. Click Ok to set the state of the BSC ME.

LNote: You cannot perform the Lock action, if BSC is

already in locked state.

4.4 Modifying BSC Details

You can change the configuration data of a BSC node

based on your requirement. The value of the Admin State

field of the BSC should be locked for modifying BSC fields.

Follow the below steps to modify the desired BSC fields:

1. Open the BSS node in the modify mode.

2. Change the Admin State of the BSC to lock.

3. Expand BSC and click BSC :<IP address>.

4. Click the desired tab and edit the required fields.

5. Click Modify to save the changes.

The Confirmation message box appears.