User Manual

BSS C ONFIGURATION AND U SER G UIDE
Page 50 Commercial in Confidence © VNL
®
2010-2011, All rights reserved
5. Stack Configuration
This section describes the configuration of signaling system
(SS) number7 stack. You can add, remove, or modify MEs
in the stack.
5.1 Configuring SS7 Stack
SS 7 provides the basis for the signaling traffic on all
network switching subsystems (NSSs) and A-Interface to
the layers 1 to 3 of the open systems interconnection (OSI)
model.
LNote: BSC should be in locked state to add, modify, or
delete the stack configuration.
Follow these steps to add stack configuration:
1. Open the BSS node in the modify mode.
2. Expand StackConfig, right-click SS7 Stack, and click
Add SS7 StackConfig.
The Configuration – Add Row dialog box appears.
The configurable fields of the Configuration - Add Row
dialog box are described in the following table:
Table 10: Stack Configuration Fields
Field
Name
Description Values
Index Indicates the index value. 1
OPC Indicates the local point 1 to 16383