User Manual

BSS C ONFIGURATION AND U SER G UIDE

LNote: You can perform only add or delete functions on

AInterface table and can add maximum one row for A-

Interface.

5.1.2 Configuring TrunkGroup

Trunk group is the collection of trunks/lines that carry

incoming and outgoing traffic in order to establish

connection between switching systems.

This section describes how you can configure TrunkGroup.

5.1.2.1 Adding TrunkGroup

The TrunkGroup automatically adds in the AIF ME when you

add AInterface.

LNote: All fields of the TrunkGroup ME are read-only.

5.1.2.2 Adding AIFTrunk

You should add AIFTrunk to configure circuit identity code

(CIC) card on an AInterface trunkport. CIC is used to identify

the trunk circuit to be connected.

You cannot modify the fields of AIFTrunk. AIFTrunk lists all

CIC card with the timeslot and CIC id.

Follow these steps to add AIFTrunk configuration:

1. Open the BSS node in the modify mode.

2. Expand StackConfig, expand SS7 Stack, expand AIF,

click AInterface: <IP address>, click TrunkGroup, right-

click TrunkGroup :<IP address>, and click Add

Element.

The Add Element dialog box appears.

3. Select the ME Type as AIFTrunk and click Ok.