User Manual

BSS C ONFIGURATION AND U SER G UIDE
Page 56 Commercial in Confidence © VNL
®
2010-2011, All rights reserved
Field Name Description Values
rnational_Reserved
3. Provide the values in the specified fields.
4. Click Ok to add the link.
LNote: Operation state of link is set to automatic startup
(operational state field).
5.1.3.1 Adding Link
Link shows MTP2 link related fields. A trunkport with usage
type AIF should be enabled and in active state to add a link.
The Trunk Port ID field of Link Configuration dialog box
automatically populates. Therefore, if no trunkport is
available then you cannot add a link. Refer “Configuring
Trunkport
” to know how to enable and activate a trunkport.
You can perform add/modify/delete operations on link.
Follow these steps to add a link:
1. Open the BSS node in the modify mode.
2. Expand StackConfig, expand SS7 Stack, expand AIF,
expand SS7 Configuration, right-click Linkset:<IP
address>, and select Add Element.
3. Select Link as ME type from the ME Type drop-down list.
4. Click Ok.
The Configuration – Add Row dialog box appears.
The configurable fields of the Link Configuration - Add Row
dialog box are described in the following table: