User Manual

BSS C ONFIGURATION AND U SER G UIDE
© VNL
®
2010-2011, All rights reserved Commercial in Confidence Page 57
Table 14: Link Configuration Fields
Field Name Description Values
Link Set ID
Indicates the linkset id. This
is a read-only field.
-
Link ID Indicates the link id. 0 to 15
SLC
Indicates the signaling link
code. This is a read-only
field.
0 to 15
Trunk Port ID
Trunkport id carrying MTP2
link.
0 to 39
Time Slot
Indicates the timeslot on the
trunkport id carrying MTP2
link.
If TrunkType is E1: 1
to 31
If TrunkType is T1: 1 to
23
Slot ID
Indicates ICC card slot id
(active or mate card)
responsible for managing the
MTP2 link.
LNote: In case of redundant
hardware, operator must
configure MTP2 links on both
the cards.
-
CRC Flag
Indicates the CRC status that
is enabled or not.
crc_enable/crc_disable
Admin State
Indicates the administrative
state of the link. This is a
locked/unlocked