User Manual

BSS C ONFIGURATION AND U SER G UIDE
© VNL
®
2010-2011, All rights reserved Commercial in Confidence Page 61
Field Name Description Values
procedure is to be enabled or
not. Its value depends on the
Style field with the following
condition:
• If Style= dpc-ni then
SST Test On =
disable
• If Style= dpc-sio-ssn then
SST Test On= enable
4. Provide the values in the specified fields and click Ok.
LNote: You have to add two SS7 routes for A-Interface.
5.2 Deleting SS7 Stack
This section explains the procedure of deleting the SS7
Route, LinkSet, Link and, A-Interface.
5.2.1 Locking/Unlocking CIC
All CIC are listed in the AIFTrunk. You can lock or unlock all
or individual CIC.
Follow these steps to lock/unlock CIC:
1. Open the BSS node in the modify mode.
2. Expand StackConfig, expand SS7 Stack, expand AIF,
expand AInterface: <IP address>, expand TrunkGroup,
expand TrunkGroup :<IP address>, expand AifTrunk,
expand AIFTrunk :<IP address>, click CIC, and right-
click CIC :<IP address>.
3. Click the desired option.