User Manual

BSS C ONFIGURATION AND U SER G UIDE
© VNL
®
2010-2011, All rights reserved Commercial in Confidence Page 73
Field Name Description Values
BCCH Power
Level
Defines the downlink power of the
BCCH carrier.
0 to 127
MS_TXPWR_M
AX
Indicates the maximum TX power an
MS is permitted to use on a dedicated
control channel or a traffic channel
within the serving cell. For power
control, this parameter and the power
class of the MS determines the
maximum power level that the BSC
instructs the MS to use on a dedicated
control channel or a traffic channel. This
parameter is used for power control and
handover decision in the BSC. It is not
send to the MS but influences the
power control commands for the MS.
This parameter should be set to a value
that is needed as maximum power level
in the cell. This allows the MS to
communicate with the BTS, at every
place in the cell even under bad radio
conditions.
GSM900/GSM850:
• 2: 39 dBm
• 3: 37 dBm
• .. ..
• 18: 7 dBm
• 19: 5 dBm
0 to 15, 5 to 19