User Manual

BSS C ONFIGURATION AND U SER G UIDE
© VNL
®
2010-2011, All rights reserved Commercial in Confidence Page 77
Field Name Description Values
1: 2 dB power offset
2: 4 dB power offset
3: 6 dB power offset
Cell Bar Qualify Cell bar qualify is used by the network
to control mobile station cell selection
and reselection.
0 to 1
CELL_RESELE
CT_OFFSET
Used by the mobile station to apply a
positive or negative offset to the value
of C2 as defined in 3GPP TS 23.022
and 3GPP TS 45.008.
0 to 63
TEMPORARY_
OFFSET
Used by the mobile station as part of its
calculation of C2 for the cell reselection
process as described in
3GPP TS 45.008.
0 to 7
PENALTY_TIM
E
Defines the length of time for which
TEMPORARY_OFFSET is active.
0 to 31
cellName Indicates the name of the cell. You can
type any name for the cell. It is
recommended that you should type the
location of the cell as cell name
because the same content is sent to
mobile subscribers when you send cell
information message by using the cell
broadcast service.
1 to 25
AMR Support Indicates whether the adaptive multiple
rate service is supported or not. AMR –
amr_Hr_Only/amr_
Not_Supported