User Manual

BSS C ONFIGURATION AND U SER G UIDE

1. Open the BSS node in the modify mode.

2. Expand RadioConfig, expand LAC, and right-click the

desired cell.

3. Select Actions.

4. Click the required state.

Lock, Block, or Unlock dialog box appears based on the

selection. Here, the Unlock dialog box is shown.

5. Click Ok to lock/unlock/block the cell.

6.4.3 Viewing Cell Operational State

You can view the operational status of the cell in the

Operational State tab of cell. Reconcile the table to get the

latest status from network element. All the fields of the

Operational State tab of the cell are read-only.

6.4.4 Adding Neighbor Cell

You can add a new neighbor cell – internal or external, to an

existing cell.

Follow these steps to add a new cell:

1. Open the BSS node in the modify mode.

2. Expand RadioConfig, expand LAC, expand LAC :<IP

address>, click CELL :<IP address>, and click

Neighbour Info tab.

3. In the right-pane, click Add.

4. You can add internal or external neighbor cell. Select

internal or external from the Neighbour Type drop-down

list to add an internal or external neighbor cell.

The Configuration – Add Row dialog box appears.