User Manual

BSS C ONFIGURATION AND U SER G UIDE
Page 88 Commercial in Confidence © VNL
®
2010-2011, All rights reserved
Field Name Description Values
•
2: report 2 strongest cells from
other band
• 3: report 3 strongest cells from
other band
Enable Incoming
HO
Enables or disables incoming handovers. 0 to 1
5. Edit the fields.
6. Click Ok to add the handover details.
LNote: Similarly, you can modify the fields of the HandOver
tab. In order to modify any field, edit the required fields and
click Modify to save the changes.
Similarly, you can also delete all the handover details of a
cell by clicking Delete in the HandOver tab.
LNote: Cell should be in locked state to delete the
handover parameter.
6.4.7 Configuring Cell Power Control
You can configure the power control parameters of a cell.
You can add, modify, or delete fields of the Power Control
tab of the cell-ME.
Follow the below steps to add the power control fields:
1. Open the BSS node in the modify mode.
2. Expand RadioConfig, expand LAC, expand LAC :<IP
address>, and click CELL :<IP address>.
3. Click the Power Control tab. Refer “Error! Reference
source not found.”.