User Manual

BSS C ONFIGURATION AND U SER G UIDE
© VNL
®
2010-2011, All rights reserved Commercial in Confidence Page 89
4. Click Add.
The configurable fields of the Power Control tabbed page
are described in the following table:
Table 23: Cell Power Control Fields
Field Name Description Values
LAC Indicates the location area code of the cell. 1 to 65533,
65535
Cell ID Refers to the cell identifier. 0 to 65535
Enable MS
PWR CTRL
Controls, if UL power control (that is control of
MS Tx power) is activated/deactivated in a cell.
true/false
Enable BS
PWR CTRL
Controls if DL power control (that is control of
BS Tx power) is activated/deactivated in a cell.
true/false
Min Rx Lev UL Indicates the lower threshold for the Rx power
level measured on uplink. If the BTS/TRX
reports a lower level, the uplink power is
increased.
• 0: measured signal level < -110
dBm
• 1: -110 dBm < measured signal
level < -109 dBm
• 2: -109 dBm < measured signal
level < -108 dBm
• ...
• 62: -49 dBm < measured signal
level < -48 dBm
• 63: -48 dBm < measured signal
0 to 63