User Manual

BSS C ONFIGURATION AND U SER G UIDE
© VNL
®
2010-2011, All rights reserved Commercial in Confidence Page 95
Field Name Description Values
•
6: 6.4 % < BER < 12.8 %
• 7: 12.8 % < BER
Consistency Condition:
Max Rx Qual DL > Min Rx Qual UL
5. Click Ok to add the details.
LNote: Similarly, you can modify the fields in the Power
Control tab. In order to modify any field, edit the required
fields and click Modify to save the changes.
Similarly, you can also delete all the power control details of
a cell by clicking Delete in the Power control tab.
LNote: Cell should be in locked state to delete the power
control parameter.
6.4.8 Modifying Configuration Data
You can modify the configuration data of cell.
LNote: The administrative state of cell should be locked, if
you want to modify any field of the cell.
Follow the below steps to modify the fields of the cell:
1. Open the BSS node in the modify mode.
2. Expand RadioConfig, expand LAC, click LAC :<IP
address>, and click CELL :<IP address>.
3. Click Configuration Data tab. Refer “Error! Reference
source not found.”.
4. Edit the required values.
5. Click Modify and click Ok to save the changes.