Specifications

ManualsBrandsViking Range ManualsIndustrialDesigner Series

Bag Removal

We recommend removing bag when trash is compacted to four

or five inches below top of basket. If you find this is too heavy,

compact less trash next time.

1. Pull basket release handle down. Lift storage compartment cover

up. Release bag from buttons. Pull up top edges of bag.

2. Close bag with twisties provided. (See illustrations)

3. Grasp trash bag handles and carefully remove from drawer. Carry

basket with bag to trash storage area.

4. Pull handles of basket away from each

other to loosen bag.

5. Lift bag out.

WWAARRNNIINNGG:: PPEERRSSOONNAALL IINNJJUURRYY HHAAZZAARRDD

Sharp objects may protrude through bag after removal from

trash basket. Handle carefully by the top to avoid injury.

Operating Your Trash Compactor

TToo SSttaarrtt::

1. Close trash drawer.

2. Turn key/knob to START position and HOLD momentarily. Release

key/knob.

CCoommppaaccttiioonn CCyyccllee

The compactor ram will move down inside the trash drawer,

reverse, and return to original position, completing the cycle in

approximately 35 seconds. As the basket is filled, the ram travels a

shorter distance and cycle time decreases.

DDUURRIINNGG TTHHEE CCOOMMPPAACCTTIIOONN CCYYCCLLEE,, TTHHEE RRAAMM DDOOEESS NNOOTT TTOOUUCCHH

TTHHEE BBOOTTTTOOMM OOFF TTHHEE DDRRAAWWEERR.. TTHHEERREEFFOORREE,, YYOOUU CCAANN

EEXXPPEECCTT

TTOO CCYYCCLLEE SSEEVVEERRAALL LLOOOOSSEE TTRRAASSHH LLOOAADDSS BBEEFFOORREE CCOOMMPPAACCTTIIOONN

IISS EEVVIIDDEENNTT.. TTHHIISS IISS NNOORRMMAALL AANNDD NNOOTT AA CCA

AUUSSEE FFOORR CCOONNCCEERRNN..

As the ram compacts difficult to break items, you may notice a

downward movement of the compactor drawer. This in normal and will

not cause damage. The spring-loaded drawer is specially designed to

move down freely and return to its original position. The force of the

ram during a compaction cycle is absorbed by the heavy gauge steel

frame of the compactor.

TToo SSttoopp CCyyccllee aanndd OOppeenn DDrraawweerr

You may stop or interrupt a compaction cycle at any time and

raise the ram to its original position.

1. Turn the key/knob to STOP position to stop the ram.

2. Turn the key/knob to START position and HOLD momentarily to

return the ram to original position. The drawer may then be

opened.

3. Turn key/knob to START position and HOLD to start another cycle.

Compact FanStart

Off

Stop