Specifications

SPA STARTUP DIRECTIONS
All Viking Spas require a solid, flat surface.* This is to ensure that the
spa cabinet is not exposed to a pressure stress condition that may
result in cabinet damage and shell cracking.
A concrete pad is
the best example of a solid, flat surface, however, wood
decking is suitable, provided it can withstand 85# per sq.
ft. without deflection.
* FAILURE TO PROVIDE A PROPER, SOLID, FLAT SURFACE
MAY DAMAGE YOUR SPA AND VOID YOUR WARRANTY.
The following procedure should be followed on initial startup and
whenever the spa is drained for maintenance. Read each step in its
entirety before proceeding with that step. Please check with a licensed
contractor and local codes prior to any construction.
OPERATION INSTRUCTIONS
It is very important to make sure that the spa is filled at least 3/4 way
up the skimmer opening. Make sure the gate valves are in the
open or up position.
WARNING
: Do not r
un spa with gate valves closed or r
un pump with
no water circulating in spa for long periods. Damage could occur to
the spa equipment.
9