Specifications

SPA SURFACE CARE

Do not use abrasive solvents or cleaners to clean spa sur-

faces. Only use the following: Lemon Juice, Amonia,

Vinegar or Soap and Water.

LONG-TERM STORAGE (90 days or more)

We strongly urge you to contact your dealer to winterize

your spa. If you are not going to use your spa for an extended period of

time, drain it as described above. You will also have to drain the pump.

Water left in the spa during long-term storage may cause freeze damage.*

To drain the pump, remove the drain plug from the face of the pump.

Additional water removal is required to prevent freeze damage to the

spa plumbing assembly. Remove the piping assembly between the

pump and the heater by loosening the union at the pump and the union

at the heater. Once the piping is removed, use a wet/dry shop vac to

vacuum water from both the pump side and the heater side openings.

Once all water is removed from these lines, we also recommend that

you place the vacuum over each jet and the suction fittings and vacuum

any remaining water that may be trapped in these lines. You may now

reinstall the piping assembly that was removed earlier and reinstall the

pump plug.

NOTE: We also recommend vacuuming each jet opening to ensure

that all of the water is out of the plumbing lines.

*FREEZE DAMAGE TO THE SPA PLUMBING IS NOT COVERED

UNDER THE WARRANTY.

SPA PILLOW MAINTENANCE

• Your spa pillows need to be washed and rinsed periodically to

remove any chemical residue. This should help to eliminate pillows

becoming stiff and discolor

ed. Note: Y

our spa pillows ar

e not cover

under your warranty.

• If the spa is not to be used for a period of time, pillows should be

removed. This will extend the life of the pillow