Installation Instructions

26
Headline
26
11
12
13
14
Pull supply tubing forward under unit.
Note: DO NOT use plastic water lines.
Flush water line by running two quarts of water
into a bucket. Turn water off.
Connect supply tube to water valve using
a 1/2” wrench. Note: DO NOT overtighten.
Turn on water supply and check for leaks.
10b
Place unit within 3” (7.6 cm) of being fl ush with cabinets.
Note: To avoid cabinet damage, place cardboard
between cabinets and unit. When moving unit,
DO NOT crimp, kink or crush water supply line.
Carefully move unit until semi fl ush with cabinet
(depending on unit).
3”
3”
3”
10a
Installation