Installation Instructions

ManualsBrandsViking ManualsKitchen Appliance PackageViking 3 Series VIRECTWODWRH88

Viking Range, LLC

111 Front Street

Greenwood, Mississippi 38930 USA

(662) 455-1200

For product information,

call 1-888-(845-4641)

or visit the Viking Web site at vikingrange.com

F21287 EN

(090113)

Professional Indoor and

Outdoor Hoods

Installation Guide

Summary of content (20 pages)

PAGE 1
Installation Guide Viking Range, LLC 111 Front Street Greenwood, Mississippi 38930 USA (662) 455-1200 For product information, Professional Indoor and Outdoor Hoods call 1-888-(845-4641) or visit the Viking Web site at vikingrange.
PAGE 2
Table of Contents IMPORTANT—Please Read and Follow! Warnings & Important Information________________________________________________________ 3-4 VWH 10” H./12”H. Wall Hoods w/Standard Ventilator 30”, & 36” Dimensions & Specifications _____________________________________________________ 5 Clearance Dimensions ___________________________________________________________ 6 Interior Ventilator Dimensions ____________________________________________________ 7 VWH 18”H.
PAGE 3
IMPORTANT—Please Read and Follow! Dimensions & Specifications (VWH 10” H./12”H. Wall Hoods w/Standard Ventilator 30”, & 36”) CAUTION WARNING For general ventilating use only. Do not use to exhaust hazardous or explosive materials and vapors. To reduce the risk of injury to persons in the event of a rangetop grease fire, observe the following. (Based on “Kitchen Firesafety Tips,” published by NFPA.) 1 (30 2 ” .5 cm ) 1.
PAGE 4
Clearance Dimensions Interior Ventilator Dimensions (VWH 10” H./12”H. Wall Hoods w/Standard Ventilator) (VWH 10” H./12”H. Wall Hoods w/Standard Ventilator) Top View 24”W. 30”W. 36”W. 60 (15 ”m i 24 (61”mi .0 n. c 27 t o m) ” (68 max .6 .* cm ) 2.4 n. c 63 to m) ” (16 ma 0.0 x. cm ) ” 36 m) c .4 (91 A 23-7/8” (60.6 cm) 29-7/8” (75.9 cm) 35-7/8” (91.1 cm) 24”W. 30”W. 36”W. B 5-1/4” (13.3 cm) 8-1/4” (20.9 cm) 11-1/4” (28.6 cm) 24”W. 30”W. 36”W. C 11-15/16” (30.3 cm) 14-15/16” (37.
PAGE 5
Dimensions & Specifications Clearance Dimensions (VWH 18”H. 24” Deep Wall Hoods 30”, 36”, 42”, 48”, & 60”) (VWH 18”H. Wall Hoods) 30”W. 36”W. 42”W. 48“W. 60”W. A (Hood width) 29-7/8“ (76.2 cm) 35-7/8” (91.1 cm) 41-7/8” (106.4 cm) 47-7/8” (121.6 cm) 59-7/8” (152.1 cm) (3012” .5 cm ) (15 6” .2 cm ) (4518” .7 cm ) A ” 24 cm) .0 (61 66 (16 ”m 7.6 in. c 72 to m) ” (18 ma 2.9 x. cm ) NOTE: Optional duct cover sold separately. VWH 18”H.
PAGE 6
Interior Ventilator Dimensions Exterior Ventilator Dimensions (VWH 18”H. Wall Hoods) (VWH 18”H. Wall Hoods) Top View Top View A A 30”W. 36”W. 42”W. 48”W. 60”W. A 14-15/16” (37.9 cm) 17-15/16” (45.6 cm) 20-15/16” (53.2 cm) 23-15/16” (60.8 cm) 29-15/16” (76.0 cm) 30”W. 36”W. 42”W. 48”W. 60”W. 4-5/8” (11.7 cm) B 29-7/8” (75.9 cm) 35-7/8” (91.1 cm) 41-7/8” (106.4 cm) 47-7/8” (121.6 cm) 59-7/8” (152.1 cm) 30”W. 36”W. 42”W. 48”W. 60”W. A 14-15/16” (37.9 cm) 17-15/16” (45.6 cm) 20-15/16” (53.
PAGE 7
Dimensions & Specifications Clearance Dimensions (VWHO 18”H. Outdoor Wall Hoods 36”, 48”, & 60”) (VWHO 18”H. Outdoor Wall Hoods) Seal joints with silicone. Provided on “T” Series only. ” 18 ) 1 (30 2” .5 cm ) .7 (45 cm ” “X M /2” I D 4-1 m) + c .4 (11 (15 6” .2 cm ) 36”W. 48“W. 60”W. 1 (45 8” .7 cm ) ” 27 cm) .6 (68 66 A (Hood width) 35-7/8” (91.1 cm) 47-7/8” (121.6 cm) 59-7/8” (152.1 cm) (16” m 7.6 in. c 72 to m) (18” m 2.9 ax. cm ) ” 27 cm) A .6 (68 30 (76 ”mi . 2 n.
PAGE 8
Dimensions & Specifications Clearance Dimensions (VCWH Chimney Wall Hoods 30”, 36”, 42”, 48”, 54”, & 60”) (VCWH Chimney Wall Hoods) A 30”W. 36”W. 42”W. 48“W. 60”W. 66”W. A (Duct width) 12“ (30.5 cm) 12“ (30.5 cm) 12“ (30.5 cm) 18“ (45.7 cm) 24“ (61.0 cm) 24“ (61.0 cm) B (Hood width) 30”W. 29-7/8“ (76.2 cm) 36”W. 35-7/8” (91.1 cm) 42”W. 41-7/8” (106.4 cm) 48“W. 47-7/8” (121.6 cm) 60”W. 59-7/8” (152.1 cm) 66”W. 65-7/8” (167.3 cm) (3012” .5 c to m) 2 (61 4” .0 cm ) (15 6” .2 cm ) (4518” .
PAGE 9
Interior Ventilator Dimensions Exterior Ventilator Dimensions (VCWH Chimney Wall HoodsF (VCWH Chimney Wall HoodsF Top View 12” (30.5 cm) Top View 120V power supply 1-1/2” (3.8 cm) 12” (30.5 cm) A A 30”W. 36”W. 42”W. A 14-15/16” (37.9 cm) 17-15/16” (45.6 cm) 20-15/16” (53.2 cm) 30”W. 36”W. 42”W. B 29-7/8” (75.9 cm) 35-7/8” (91.1 cm) 41-7/8” (106.4 cm) 8” (20.3 cm) 1-1/2” (3.8 cm) 120V power supply 1-1/2” (3.8 cm) 7” (17.8 cm) dia. duct location 30”W. 36”W. 42”W. A 14-15/16” (37.
PAGE 10
Dimensions & Specifications Clearance Dimensions (VCIH Chimney Island Hoods 36”, 42”, 54”, & 66”) (VCIH Chimney Island Hoods) A 36”W. 42”W. 54”W. 66”W. A (Duct width) 12” (30.5 cm) 12” (30.5 cm) 18” (45.7 cm) 24” (70.0 cm) 36”W. 42”W. 54”W. 66”W. B (Duct height) 12” (30.5 cm) or 24” (61.0 cm) or 36” (91.4 cm) 36”W. 42”W. 54”W. 66”W. C (Hood width) 35-7/8” (91.1 cm) 41-7/8” (106.4 cm) 53-7/8” (136.8 cm) 65-7/8” (167.3 cm) (15 6“ .2 cm B ) 1 (45 8” .7 cm ) ” 30 cm) C 66 .2 (76 (16 ”m 7.6 in.
PAGE 11
Interior Ventilator Dimensions Exterior Ventilator Dimensions (VCIH Chimney Island HoodsF (VCIH Chimney Island HoodsF Top View Top View 12” (30.5 cm) 36”W. 42”W. A 17-15/16” (45.6 cm) 20-15/16” (53.2 cm) 36”W. 42”W. B 35-7/8” (91.1 cm) 41-7/8” (106.4 cm) 1-1/8” (2.9 cm) 12” (30.5 cm) 120 V power supply A 36”W. 42”W. A 17-15/16” (45.6 cm) 20-15/16” (53.2 cm) 36”W. 42”W. B 35-7/8” (91.1 cm) 41-7/8” (106.4 cm) 1-1/8” (2.9 cm) 6” (15.2 cm) 1-1/8” (2.9 cm) 120 V power supply A 1-1/8” (2.
PAGE 12
Dimensions & Specifications Installing Hood Canopy (VBCV Wall Custom Ventilator System 36”, 42”, 48”, & 60”) (Custom Hood Canopy CutoutsF A* *For best results, center the unit over the burners of the cooking product (front to back; right to left). Make sure the back wall of the custom hood canopy is flush with the cutout so the ventilator system may be mounted as shown on page 25. B* Custom Hood Canopy A B Bottom Cutout Dimensions Wall Hoods Description 36” 42” 48” 60” W. W. W. W.
PAGE 13
Built-In Wall Custom Ventilator System Dimensions (VBCV ModelsF Clearance Dimensions (VBCV Wall Custom Ventilator System) 1-1/2” (3.8 cm) 1” (2.54 cm) 1-1/2” (3.81 cm) 7/8” (2.2 cm) (Cu sto m 11-1/2” (29.2 cm) Ho od ) 17-1/4” (43.8 cm) 6” (15.2 cm) 5/8” (1.6 cm) 66 5/8” (1.6 cm) 21-7/8” (55.8 cm) 21-7/8” (55.8 cm) (16 ”m 7.6 in. c 72 t o m ) ” (18 ma 2.9 x. cm ) 30 (7 ”m 6.2 in. c 36 to m) ” (91 ma .4 x.
PAGE 14
Built-In Wall Custom Ventilator System Dimensions (VBCV ModelsF D 5-1/2” (14.0 cm) 10” (25.4 cm) dia. duct location 5/8” (1.6 cm) C 1200 or 1500 CFM Exterior or In-Line Ventilator Installation 48”, 60” W. Models Planning Information Proper installation of ducting is extremely important to ensure maximum performance from any ventilation product. • All CFMs are based on tests at 0.1 static pressure: without applying static pressure, CFM would be greatly overstated.
PAGE 15
Installation (VWH 10” H./12”H. Wall Hoods w/Standard Ventilator) 6 2 1 5/16” nut driver 5/16” nut driver Check damper for unrestricted movement, adjust if necessary. Attach transition to damper. Seal with aluminum tape. WARNING 3 CAUTION: If not using a duct cover, using screws provided, make sure top mounting screws are secured into soffit or cabinet framing. Use additional mounting screws, if necessary. CAUTION: Secure vent hood to wall using screws provided.
PAGE 16
Duct Cover Option Installation (VWH 10” H./12”H. Wall Hoods w/Standard Ventilator) (VWH 10” H./12”H. Wall Hoods w/Recirculating Kit) 3 1 2 4 2 Attach with screws and lock washers provided. Measure distance from ceiling to canopy. Slide the duct cover in place and fasten from inside canopy using the sheet metal screws provided. Attach with screws.
PAGE 17
Installation Installation (con’t) (VWH 10” H./12”H. Wall Hoods w/Recirculating Kit) 8 (VWH 18”H. Wall & VCWH Chimney Wall Hoods) 9 BARE OR GREEN 1 1 1-1/2”x 3/4” (3.8 cm) x (1.9 cm) Slot for wood strip 5/16” nut driver wood strip 1 2 1(413/1 .6 6 cm ” ) 5/16” nut driver 2 GREEN BLACK WHITE BLACK WHITE Connect black to black, white to white, and the green/bare wire under the green screw. NOTE: Housing wiring must be properly installed for wiring to be correct when wiring unit.
PAGE 18
Duct Cover Option (VWH 18”H. Wall Hoods) 2 1 Measure distance from ceiling to canopy. Duct Cover Option 2 1 (VCWH Chimney Wall Hoods) 2 Measure distance from ceiling to canopy. Slide the duct cover in place and fasten from inside canopy using the sheet metal screws provided. Tape to avoid scratching. 3 4 To install ventillation kit refer to ventillation kit installation instructions. Place duct cover top inside duct cover base and lower until desired height is found. Mark height.
PAGE 19
Installation (VCIH Island Hoods) 2 1 Check framing where cutout will be. NOTE: 200 lb. limit. Cut appropriate size hole in ceiling. Either 7” or 10” depending on your specific unit and ventillator kit. A1 Mounting options: Installation (VCIH Island Hoods) 4 3 5/16” nut driver Run duct work down to bottom edge of duct cover/soffit and secure in place. Make sure the duct does not stick down past the cover. Attach canopy to duct cover/soffit. Seal top of hood to duct with aluminum tape.
PAGE 20
Service & Registration If service is required, call your dealer or authorized service agency. The name of the authorized service agency can be obtained from the dealer or distributor in your area. Have the following information readily available. • Model number • Serial number • Date purchased • Name of dealer from whom purchased Clearly describe the problem that you are having.