Use and Care

37
USA
10.4 CLEANING THE HOSE
FILTER
Damages on the machine that may
be caused by impurities coming from
the water supply or your own water
installation (such as sand, dirt, rust,
etc.) can be prevented by means of the
filter attached to the water inlet hose.
Check the filter and the hose regularly
and clean them if necessary.
1. Turn off the tap and remove the
hose.
2. Remove the filter and clean under
running tap water.
3. Place the cleaned filter back into its
seat in the hose.
4. Install the hose to tap.
(Select Models)
LOWER WASH ARMS
Check if the holes on the lower
wash arms (1) are clogged. If they
are clogged, remove and clean the
impeller. Pull the lower wash arms up
to remove it.
UPPER WASH ARMS
Check if the holes on the upper
impeller (1) are clogged. If they are
clogged, remove and clean the wash
arms. Turn nut left to remove the upper
wash arms.
Make sure that the nut is tightened well
when installing the upper wash arms.
10.5 CLEANING THE WASH
ARMS
Clean the wash arms at least once a
week in order for the machine operates
efficiently.