Use and Care Manual

28
Operation
The Speedcook Oven
Making Adjustments
Making Adjustments during a Cook Cycle
When a cook cycle is 80% complete, the oven
chimes and cooking is paused for 1 minute. This
gives you the chance, if desired, to make mid-
course adjustments to account for di erences
in food products and individual tastes. To make
adjustments during a cook cycle:
Note: For food items with a cook time of less than
2-1/2 minutes, the cook cycle does not pause at the
80% complete mark.
1. Choose and cook an item as described in
previous sections.
2. When the cook cycle is 80% complete, a
chime sounds, the cook cycle pauses and
you have the option to check your food and,
if desired, adjust the cook settings.
a. Check your food item for adjustments at
80% complete.
b. If you do not wish to check the food item,
tap Continue Cooking to resume the
cook cycle or do nothing. After 1 minute,
the oven will automatically resume
cooking. If an adjustment is not made, the
oven completes the cook cycle according
to the original settings.
Note: Anytime the oven door is opened, a message
will display on the screen saying the oven door is
open, close to continue.
3. On the touch screen, select the desired
adjustment.
• Continue Cooking: Select if food is
cooking to expectations
• Cook less: Select if food appears to be
overcooking or the internal temperature
is too high.
• Brown less: Select if the outside of the
food is browning faster than desired.
• Cook & brown less: Select if food is
cooking and browning more than
expected, but still requires additional
cooking time.
• Finished: Select if no adjustments are
needed and your food is su ciently
cooked.
Note: If your food item is done at the 80%
complete chime, remove it from the oven and tap
Finished to end the cook cycle.
4. Oven will automatically restart when these
adjustments are selected. Adjustments
cannot be changed after they are made.
Note: When an adjustment is made, only the
power level changes, NOT the remaining cook
time.
Note: If Repeat Cook is selected at the end of
the cook cycle, the oven will use the exact same
settings used for the previous cook cycle, including
any adjustments made at the 80% complete point.