Installation Guide Duct Cover Extension for Chimney Hoods
FOR INSTALLATION WITH CEILINGS FROM 9’ (.24 m) TO 10’ (.30 m) IMPORTANT-PLEASE READ AND FOLLOW •Before beginning, please read these instructions completely and carefully. •Do not remove permanently affixed labels, warnings, or plates from the product. This may void the warranty. •The installer should leave instructions with the consumer who should retain for local inspector’s use and for future reference. 1. Measure from top of the canopy to ceiling and subtract 1/8” (.3 cm) for clearance.
CAUTION: To reduce the risk of scratching the duct cover top, come down in one motion to desired height. Do not adjust the duct cover up and down. A Retaining Nuts Optional DRK - 28” (71.1 cm) Duct Cover Extension B C Canopy Duct Cover Base Figure 3 A 12” (30.5 cm) Figure 2 A B C 30” W., 33” W. 10” (25.4 cm) Min. 30” (76.2 cm) Max. 42” (106.7 cm) 36” W., 39” W. 42” W., 45” W. 12” (30.5 cm) Min. 28” (71.1 cm) Max. 40” (101.6 cm) 16” (40.6 cm) 48” W., 51” W. 18” (45.7 cm) Min. 28” (71.
Viking Range, LLC 111 Front Street Greenwood, Mississippi 38930 USA (662) 455-1200 For product information, call 1-888-845-4641.
