Specifications

Page 19
Where heating/cooling devices are employed, the heating/cooling media
should be circulated 15-20 minutes prior to pump start-up and should be
allowed to continue for a similar period of time after the pump has been
shutdown. Where a CIP cycle is employed as part of the process, the
heating/cooling media should continue to be circulated during the cleaning
cycle.
Fig 8 Dimensions for Heating/Cooling.
Dimensions in Millimeters
A6 M1 A7 M2 A8
RTP20/0100/10
80 79 N/A N/A 45
RTP30/0128/12
108 86 82.5 51 N/A
Dimensions in Inches
A6 M1 A7 M2 M2
RTP20/0100/10
3.14 3.11 N/A N/A 1.77
RTP30/0128/12
4.25 3.39 3.25 2.01 N/A
* BSP Ports fitted as standard.
* N/A = Option not available.
Note: For all other dimensions see section 5.5.
A6
A6
1/2" PORTS
M1
M2
A7 A7
1/8" PORTS
(INLET / OUTLET)
1/8" PORTS
(INLET / OUTLET
1/2" PORTS
A6
A6
RTP20/0100/10 RTP30/0128/15
A8