Specifications

Page 27
4.2 Assembly.
4.2.1 Gearbox & Rotorcase Assembly,
see fig 14.
- Install front bearing cups (24 not shown).
Do not install the front lip seals (17) until the bearing pre-load has been
set. The lips may give a false rolling torque reading as well as increasing
the risk of damage during assembly.
- Install rotorcase (40) to gearbox (16) and secure using cap screws (7).
- Install drain plug (5) , where required in required position in gearbox
cover (16).
- If not already installed, mount feet (1) to rotorcase (40) in the required
positions using cap screws (2). Install the seal sleeve (if required) see
section 4.3.
Fig 14 Gearbox & Rotorcase Assembly.
WARNING