Installation Guide

9
Anti-Tip Dimensions (Bottom-Freezer)
WARNING
TIP OVER HAZARD
Appliance is top heavy and tips easily when not
completely installed. To avoid a hazard due to instability
of the appliance, it must be installed according to the
instructions including the anti-tip bracket
C
C
Cabinet
Rear
Floor
A
Cabinet
Opening
Dimension A = Cabinet opening minus the refrigerator height + 1-1/4" (3.2 cm)
Anti-tip Bracket
There are 12 hole locations on the anti-tip
bracket. Of those 12, at least 4 places must be
used.
NOTE: Number of fasteners must be suitable for
load in order to prevent tipping.