Installation Instructions

15
With the refrigerator in line with the cut-
out, but outside of the cabinetry, insert the
copper tubing through the indicated hole.
Push the copper tubing through the
machine compartment until it comes out
the front side of the refrigerator.
Roll the refrigerator into place in the
cabinet cut-out.
Coil the copper tubing in a vertical
loop so that the end of the copper
tube faces toward the rear of the
refrigerator.
Insert the end of the copper tube
into the water valve.
Tighten the nut until the ferrule  ts
snug on the copper tube.
Level the refrigerator, replace the
grill, and replace the toe kick.
Copper
tubing
Water valve
Water Line Installation