Installation Instructions

17
Install Door Trim Insert
Use the roll of trim insert located in the drawer inside
the unit to apply to the door trim.
1
Measure and cut 2-1/16” (5.2 cm) diagonal in
lower left corner.
Cut out diagonal in lower left corner.
3”
(7.62 cm)
5/8”
(1.6 cm)
3
2
1
1
1
-13/16”
(4.60 cm)
2
3/32”
(.24 cm)
5/8”
(1.6 cm)
3
3
2
1
Bottom-Freezer Custom Panel Hinge Cutout (if required)
Final view of lower corner.
4
For a left hinge door, cut 5/8” x 3” in lower left corner.
Note: Steps show panel upside down and notched for left
hinge application. Mirror dimensions for right hinge door.