Installation manual

6
General Information
Materials Which May Be Needed
Hot Water Supply Line – Minimum 3/8” O.D. copper tubing or metal
braided dishwasher supply line.
90° elbow with 3/8” N.P.T. male threads on one leg, and sized to fit
your water supply line (copper tubing/compression fitting, or braided
hose) on the other leg.
UL listed conduit connector or strain relief.
Teflon tape or other pipe thread compound to seal plumbing
connections.
Shut-off valve and fittings appropriate for hot water supply line (copper
tubing/compression fitting, or braided hose).
Silicone.
Glue.