User`s guide

Instruction book Freesia 415, 425
21
Programming - Model 425
Touch FUNC so that PROG is
shown on the display. If you already
have a program in the memory this
will now be shown.
Touch CLR to empty the memory.
See page 22.
Example
Select a stitch e.g.
The stitch is now entered in the
memory. Touch the button .
Select another stitch e.g. .
Touch the button .
In this way you can combine diff-
erent stitches according to your own
taste and imagination. With the
button you can go backwards to
see what you have programmed.
To sew your program, touch FUNC
to REP. The machine will begin at
the first programmed stitch.
Also see "Quick Info" on the
machine.
Programming with stitch changes
In PROG position you can change
stitch length and width or mirror
stitches. Certain stitches, however,
have a limited stitch length and/or
width.
1. Select desired stitch.
2. Use the stitch length and the
stitch width buttons (+) or (-) or
the mirroring button to change
the setting before entering with
the button .