User`s guide

Instruction book Freesia 415, 425
45
Removing the stitch plate
Remove the presser foot and the bobbin cover. Lower the feed teeth (see
page 15). Place the stitch plate opener on the brush. There is a recess at the
rear of the stitch plate. Insert the stitch plate opener into the recess and pull
the brush toward you to pop the stitch plate off..
Cleaning
When necessary, the feed teeth and the bottom of the bobbin area must be
cleaned with the brush, which you will find with the accessories.
Replacing the stitch plate
Replace the stitch plate about 5 mm in front of the rear edge and push it
backward. Replace the bobbin cover. Raise the feed teeth.
Maintenance