Use and Care Manual / Installation Instructions



Remove the diuser shield by pushing it up with both

hands, then pushing it back far enough for the front to

drop down, and then pull out.

 Grab each end of the bulb (metal ends of tube), rotate

clockwise until you can pull the bulb out.

 Insert the ends of the new bulb into the black ends of the

ballast, then turn counter-clockwise until the bulb snaps

into place.

 Replace the shield by lifting it up and back over the notch

in the back of the cabinet, push up the front until it clears

the front of the diuser frame, pull forward and drop into

place.

Push up and back over

notch in back of cabinet,

then let front drop down

Occasionally you may need to replace a light bulb. It is a simple process, similar to changing the bulb on an aquarium hood.

For part number, see the list on page 26.

NOTE: T5 growing lights running at the default

time of 18 hours per day is considered high use

and the eciency of the bulbs will reduce approx-

imately 10% after 20,000 hours. Bulbs should be

replaced every 18-24 months to ensure best performance.

REPLACING THE LIGHTS