Insulated Grill Jacket Installation Guide

Installation Guide
Insulated Grill Jacket
5 Series Gas Grills
Required when installing grill head in combustible materials
Models
INJK30 – used with VGBQ53024
INJK36 – used with VGBQ53624
INJK42 – used with VGBQ/VGIQ54224
INJK54 – used with VGBQ/VGIQ55424
Installation
Each kit includes a lower panel (a), lower panel support (b),
rear panel (c), side panels (d), sheet metal fasteners (e), and
cabinet fasteners (f)
Start by attaching (a) to (b) with fasteners (e)
INJK30 - uses ten (10)
INJK36 - uses eight (8)
INJK42 - uses twelve (12)
INJK54 - uses sixteen (16)
Second, attach the rear panel (c) to the lower panel (a)with
fastener (e)
Third, attach each side panel (d) to the lower and rear panels
with three fasteners between (a) and (d), and three fasteners
between (d) and (c)
Last, fully insert the assembly into the enclosure and attach
the assembly to the cabinet using cabinet fasteners
F21041B (3/28/14)
Description
INSULATED GRILL JACKETS
INJK30 INJK36 INJK42 INJK54
Cutout Width
29 3/4” (75.6 cm) 35 5/8” (90.5 cm) 41 3/4”” (106.0 cm) 53 3/4”” (136.5 cm)
Cutout Depth
25” (63.5 cm)
Cutout Height
10 3/4” (27.3 cm)
Overall Width
30” (76.2 cm) 35 7/8” (91.1 cm) 42” (106.7 cm) 54” (137.2 cm)
Overall Depth
25” (63.5 cm)
Approximate
Shipping Weight
27 lbs. (12.3 kg) 30 lbs. (13.6 kg) 33 lbs. (15.0 kg) 36 lbs. (16.4 kg)
Basic Specifi cations
All models with standard equipment
are design-certifi ed for residential
installation.
Viking Range, LLC
111 Front Street, Greenwood, Mississippi 38930 USA
[phone]
For product information, call 1-888-845-4641.