User manual

VIKING COMPONENTS 56K USB MODEM USER’S GUIDE

4 Software Installation

Once the Viking USB fax/modem is installed, you will need to install the software

necessary to communicate with the fax/modem. This chapter will cover the steps

necessary to configure your computer’s operating system.

Mac OS 8.5 or Later Driver Software

1. Insert the “Viking Modem Companion Software” CD into your computer’s CD-

ROM drive. Once the CD appears on your system’s desktop, double-click on its

icon to open. Locate the “Viking Modem Installer”icon on the CD and double-click

on it to launch.

Note: If the CD can not be located,the drivers can be downloaded from the Viking

Components Web site at: www.vikingcomponents.com

3. Select “Viking 56K USB Modem” by clicking on its button. Then click the “Install”

button to begin the driver installation.

4. Once the driver installation is done, click the “Quit”button to leave the installer.

Chapter 4