Operation Manual
Table Of Contents
- 1. Inhaltsverzeichnis
- 2. Zu dieser Gebrauchsanleitung
- 3. Gerätebeschreibung
- 4. Zu Ihrer Sicherheit
- 5. Symbolbeschreibung
- 6. Lieferumfang
- 7. Gerät betriebsbereit machen
- 8. Sicherheitseinrichtungen
- 9. Hinweise zum Arbeiten
- 10. Gerät in Betrieb nehmen
- 11. Wartung
- 12. Transport
- 13. Verschleiß minimieren und Schäden vermeiden
- 14. Umweltschutz
- 15. Übliche Ersatzteile
- 16. CE- Konformitätserklärung des Herstellers
- 17. Technische Daten
- 18. Fehlersuche
- 19. Serviceplan
- 1. Table of contents
- 2. Notes on the instruction manual
- 3. Machine overview
- 4. For your safety
- 5. Description of symbols
- 6. Standard equipment
- 7. Preparing the machine for operation
- 8. Safety devices
- 9. Notes on working with the machine
- 10. Operating the machine
- 11. Maintenance
- 12. Transport
- 13. Minimising wear and preventing damage
- 14. Environmental protection
- 15. Standard spare parts
- 16. CE - manufacturer's declaration of conformity
- 17. Technical specifications
- 18. Troubleshooting
- 19. Service schedule
- 1. Sommaire
- 2. À propos de ce manuel d’utilisation
- 3. Description de l’appareil
- 4. Consignes de sécurité
- 5. Signification des pictogrammes
- 6. Contenu de l’emballage
- 7. Préparation de l’appareil
- 7.1 Généralités
- 7.2 Montage du guidon
- 7.3 Accrochage et décrochage du câble de démarrage
- 7.4 Basculement de la partie supérieure du guidon
- 7.5 Assemblage du bac de ramassage
- 7.6 Décrochage et accrochage du bac de ramassage
- 7.7 Réglage centralisé de la hauteur de coupe
- 7.8 Carburant et huile moteur utilisés
- 8. Dispositifs de sécurité
- 9. Conseils d’utilisation
- 10. Mise en service de l’appareil
- 11. Entretien
- 12. Transport
- 13. Comment limiter l’usure et éviter les dommages
- 14. Protection de l’environnement
- 15. Pièces de rechange courantes
- 16. Déclaration de conformité CE du fabricant
- 17. Caractéristiques techniques
- 18. Recherche des pannes
- 19. Feuille d’entretien
- 1. Inhoudsopgave
- 2. Over deze gebruiksaanwijzing
- 3. Beschrijving van het apparaat
- 4. Voor uw veiligheid
- 5. Toelichting van de symbolen
- 6. Leveringsomvang
- 7. Apparaat klaarmaken voor gebruik
- 8. Veiligheidsvoorzieningen
- 9. Aanwijzingen voor werken
- 10. Apparaat in gebruik nemen
- 11. Onderhoud
- 12. Transport
- 13. Slijtage minimaliseren en schade voorkomen
- 14. Milieubescherming
- 15. Standaard reserveonderdelen
- 16. CE- conformiteitsverklaring van de fabrikant
- 17. Technische gegevens
- 18. Defectopsporing
- 19. Onderhoudsschema
- 1. Indice
- 2. Avvertenze sulle istruzioni per l’uso
- 3. Descrizione dell’apparecchio
- 4. Per la vostra sicurezza
- 5. Descrizione dei simboli
- 6. Equipaggiamento fornito
- 7. Preparazione per la messa in servizio dell'apparecchio
- 7.1 Informazioni generali
- 7.2 Montaggio del manubrio
- 7.3 Aggancio e sgancio del cavo di avviamento
- 7.4 Chiusura della parte superiore del manubrio
- 7.5 Assemblaggio del cesto raccolta erba
- 7.6 Sgancio e aggancio del cesto di raccolta erba
- 7.7 Regolazione centralizzata altezza di taglio
- 7.8 Carburante e olio motore
- 8. Dispositivi per la sicurezza
- 9. Istruzioni di lavoro
- 10. Messa in servizio dell'apparecchio
- 11. Manutenzione
- 12. Trasporto
- 13. Minimizzare l’usura ed evitare danni
- 14. Tutela dell’ambiente
- 15. Ricambi standard
- 16. Dichiarazione di conformità CE del costruttore
- 17. Dati tecnici
- 18. Risoluzione guasti
- 19. Programma Assistenza Tecnica
- 1. Índice
- 2. Acerca de este manual de instrucciones
- 3. Descripción del equipo
- 4. Para su seguridad
- 5. Descripción de los símbolos
- 6. Contenido del suministro
- 7. Preparar el equipo para el servicio
- 8. Dispositivos de seguridad
- 9. Indicaciones para el trabajo
- 10. Poner el equipo en servicio
- 11. Mantenimiento
- 12. Transporte
- 13. Reducir el desgaste y prevenir daños
- 14. Protección del medio ambiente
- 15. Piezas de recambio habituales
- 16. Declaración de conformidad CE del fabricante
- 17. Datos técnicos
- 18. Localización de anomalías
- 19. Plan de mantenimiento
- 1. Índice
- 2. Sobre este manual de utilização
- 3. Descrição do aparelho
- 4. Para sua segurança
- 5. Descrição de símbolos
- 6. Fornecimento
- 7. Preparar o aparelho para o funcionamento
- 8. Dispositivos de segurança
- 9. Instruções para trabalhar
- 10. Colocar o aparelho em funcionamento
- 11. Manutenção
- 12. Transporte
- 13. Minimização do desgaste e prevenção de danos
- 14. Protecção do meio ambiente
- 15. Peças de reposição comuns
- 16. Declaração de conformidade CE do fabricante
- 17. Dados técnicos
- 18. Localização de falhas
- 19. Plano de manutenção
- 1. Innholdsfortegnelse
- 2. Om denne bruksanvisningen
- 3. Maskinbeskrivelse
- 4. For din egen sikkerhet
- 5. Symbolforklaring
- 6. Produktkomponenter
- 7. Gjøre maskinen klar for bruk
- 8. Sikkerhetsutstyr
- 9. Informasjon om arbeid
- 10. Ta maskinen i bruk
- 11. Vedlikehold
- 12. Transport
- 13. Minimere slitasjen og unngå skader
- 14. Miljøvern
- 15. Vanlige reservedeler
- 16. Produsentens CE- samsvarserklæring
- 17. Tekniske data
- 18. Feilsøking
- 19. Serviceplan
- 1. Innehållsförteckning
- 2. Information om denna bruksanvisning
- 3. Maskinbeskrivning
- 4. För din säkerhet
- 5. Symbolbeskrivning
- 6. Leveransens omfattning
- 7. Göra maskinen klar för användning
- 8. Säkerhetsanordningar
- 9. Arbetsanvisningar
- 10. Ta maskinen i bruk
- 11. Underhåll
- 12. Transport
- 13. Minimera slitage och förhindra skador
- 14. Miljöskydd
- 15. Vanliga reservdelar
- 16. Tillverkarens CE- konformitetsdeklaration
- 17. Tekniska data
- 18. Felsökning
- 19. Serviceschema
- 1. Sisällysluettelo
- 2. Tätä käyttöopasta koskevia tietoja
- 3. Laitekuvaus
- 4. Turvallisuutesi vuoksi
- 5. Kuvasymbolien selitykset
- 6. Toimitussisältö
- 7. Laitteen valmistelu käyttöä varten
- 8. Turvalaitteet
- 9. Työskentelyohjeita
- 10. Laitteen käyttöönotto
- 11. Huolto
- 12. Kuljetus
- 13. Kulumisen minimointi ja vaurioiden ehkäisy
- 14. Ympäristönsuojelu
- 15. Varaosat
- 16. Valmistajan CE- vaatimustenmukaisuusvaku utus
- 17. Tekniset tiedot
- 18. Vianetsintä
- 19. Huolto-ohjelma
- 1. Indholdsfortegnelse
- 2. Om denne betjeningsvejledning
- 3. Beskrivelse af maskinen
- 4. Sikkerhed
- 5. Symbolforklaring
- 6. Medfølgende dele
- 7. Klargøring af maskinen
- 8. Sikkerhedsanordninger
- 9. Arbejdsanvisninger
- 10. Tag maskinen i brug
- 11. Vedligeholdelse
- 12. Transport
- 13. Sådan minimerer du slid og undgår skader
- 14. Miljøbeskyttelse
- 15. Standardreservedele
- 16. Producentens EF- overensstemmelseserklærin g
- 17. Tekniske data
- 18. Fejlsøgning
- 19. Serviceplan
- 1. Obsah
- 2. K tomuto návodu na obsluhu
- 3. Popis stroja
- 4. Pre vašu bezpečnosť
- 5. Popis symbolov
- 6. Rozsah dodávky
- 7. Príprava stroja na prevádzku
- 8. Bezpečnostné zariadenia
- 9. Pokyny pre prácu
- 10. Uvedenie stroja do prevádzky
- 11. Údržba
- 12. Preprava stroja
- 13. Opatrenia na minimalizovanie opotrebovania a na zabránenie vzniku škôd
- 14. Ochrana životného prostredia
- 15. Bežné náhradné diely
- 16. CE-Prehlásenie o zhode výrobcom
- 17. Technické údaje
- 18. Hľadanie porúch
- 19. Servisný plán
- 1. Obsah
- 2. O tomto Návodu k použití
- 3. Popis stroje
- 4. Pro vaši bezpečnost
- 5. Popis symbolů
- 6. Rozsah dodávky
- 7. Příprava stroje k provozu
- 8. Bezpečnostní zařízení
- 9. Pokyny pro práci
- 10. Uvedení stroje do provozu
- 11. Údržba
- 12. Přeprava stroje
- 13. Opatření pro minimalizování opotřebení a zabránění vzniku škod
- 14. Ochrana životního prostředí
- 15. Běžné náhradní díly
- 16. CE - Prohlášení výrobce o shodě
- 17. Technické údaje
- 18. Hledání závad
- 19. Servisní plán
- 1. Περιεχόμενα
- 2. Σχετικά με αυτές τις οδηγίες χρήσης
- 3. Περιγραφή εργαλείου
- 4. Για τη δική σας ασφάλεια
- 5. Περιγραφή συμβόλων
- 6. Περιεχόμενα συσκευασίας
- 7. Προετοιμασία του μηχανήματος για χρήση
- 8. Συστήματα ασφαλείας
- 9. Υποδείξεις για την εργασία
- 10. Θέση του εργαλείου σε λειτουργία
- 11. Συντήρηση
- 12. Μεταφορά
- 13. Ελαχιστοποίηση φθορών και αποφυγή βλαβών
- 14. Προστασία περιβάλλοντος
- 15. Συνηθισμένα ανταλλακτικά
- 16. Πιστοποιητικό συμβατότητας CE του κατασκευαστή
- 17. Τεχνικά στοιχεία
- 18. Εντοπισμός βλαβών
- 19. Πρόγραμμα συντήρησης
33
DEFRNLITESPTNOSVFIDASKCSEL EN
0478 111 9922 B - EN
Allow the machine to cool down before
working on or around the engine, exhaust
manifold or muffler in particular.
Temperatures of 80° C and above can be
reached. Danger of burns!
Direct contact with engine oil can be
dangerous. Engine oil must not be spilled.
VIKING recommends leaving the task of
topping up engine oil or performing engine
oil changes to a VIKING specialist dealer.
Cleaning:
The complete machine must be cleaned
thoroughly following use. (Ö 11.2)
Remove accumulated clipping deposits
using a stick. Clean the underside of the
mower with water and a brush.
Empty the fuel tank (e.g. by running it
empty) before placing the machine in the
cleaning position.
Never use high-pressure cleaners and do
not clean the machine under running water
(e.g. using a garden hose).
Do not use aggressive cleaning agents.
These can damage plastics and metals,
impairing the safe operation of your
VIKING machine.
In order to prevent fire hazards, keep the
area around the air vents, cooling ribs and
the area of the exhaust free from
e.g. grass, straw, moss, leaves or
escaping grease.
Maintenance operations:
Only maintenance operations described in
this instruction manual may be carried out.
Have all other work performed by a
specialist dealer.
If you do not have the necessary expertise
or auxiliary equipment, please always
contact a specialist dealer.
VIKING recommends that you have
maintenance operations and repairs
performed exclusively by a VIKING
specialist dealer.
VIKING specialist dealers regularly attend
training courses and are provided with
technical information.
Only use tools, accessories or
attachments approved for this machine by
VIKING or technically identical parts.
Otherwise, there may be a risk of
accidents resulting in personal injury or
damage to the machine. If you have any
questions, please consult a specialist
dealer.
The characteristics of original VIKING
tools, accessories and spare parts are
optimally adapted to the machine and the
user's requirements. Genuine VIKING
spare parts can be recognised by the
VIKING spare parts number, by the
VIKING lettering and, if present, by the
VIKING spare parts symbol. On smaller
parts, only the symbol may be present.
For safety reasons, fuel-carrying
components (fuel line, fuel cock, fuel tank,
tank cap, connections, etc.) must be
checked regularly for damage and leaks
and replaced by a technician if necessary
(VIKING recommends VIKING specialist
dealers).
Always keep warning and information
stickers clean and readable. Damaged or
missing stickers must be replaced by new,
original plates from your VIKING specialist
dealer. If a component is replaced with a
new component, ensure that the new
component is provided with the same
stickers.
Only perform work on the cutting unit when
wearing thick work gloves and exercising
extreme care.
Ensure that all nuts, pins and screws (in
particular the blade fastening screw) are
securely tightened so that the machine is
in a safe operating condition.
Check the complete machine and the
grass catcher box for wear or damage on
a regular basis, particularly before
extended periods when the machine is not
in use (e.g. over winter). For safety
reasons, worn or damaged parts must be
replaced immediately to ensure that the
machine is always in a safe operating
condition.
Never alter the basic setting of the engine
or run at excessive engine speeds.
Components or guards that are removed
for maintenance operations must be
properly reinstalled immediately.
4.8 Storage for prolonged periods
without operation
Allow the engine to cool before storing the
machine in an enclosed space.
Store the machine with empty fuel tank
and the fuel reserve in a lockable and well-
ventilated room.
Ensure that the machine is protected from
unauthorised use (e.g. by children).
Risk of injury due to the mowing
blade!
Pulling the recoil starter rope starts
the work tool rotating. Always
ensure sufficient distance between
the mowing blade and your body,
particularly your hands and feet,
when you pull the recoil starter
rope.