Operation Manual
Table Of Contents
- 1. Inhaltsverzeichnis
- 2. Zu dieser Gebrauchsanleitung
- 3. Gerätebeschreibung
- 4. Zu Ihrer Sicherheit
- 5. Symbolbeschreibung
- 6. Lieferumfang
- 7. Gerät betriebsbereit machen
- 8. Sicherheitseinrichtungen
- 9. Hinweise zum Arbeiten
- 10. Gerät in Betrieb nehmen
- 11. Wartung
- 12. Transport
- 13. Verschleiß minimieren und Schäden vermeiden
- 14. Umweltschutz
- 15. Übliche Ersatzteile
- 16. CE- Konformitätserklärung des Herstellers
- 17. Technische Daten
- 18. Fehlersuche
- 19. Serviceplan
- 1. Table of contents
- 2. Notes on the instruction manual
- 3. Machine overview
- 4. For your safety
- 5. Description of symbols
- 6. Standard equipment
- 7. Preparing the machine for operation
- 8. Safety devices
- 9. Notes on working with the machine
- 10. Operating the machine
- 11. Maintenance
- 12. Transport
- 13. Minimising wear and preventing damage
- 14. Environmental protection
- 15. Standard spare parts
- 16. CE - manufacturer's declaration of conformity
- 17. Technical specifications
- 18. Troubleshooting
- 19. Service schedule
- 1. Sommaire
- 2. À propos de ce manuel d’utilisation
- 3. Description de l’appareil
- 4. Consignes de sécurité
- 5. Signification des pictogrammes
- 6. Contenu de l’emballage
- 7. Préparation de l’appareil
- 7.1 Généralités
- 7.2 Montage du guidon
- 7.3 Accrochage et décrochage du câble de démarrage
- 7.4 Basculement de la partie supérieure du guidon
- 7.5 Assemblage du bac de ramassage
- 7.6 Décrochage et accrochage du bac de ramassage
- 7.7 Réglage centralisé de la hauteur de coupe
- 7.8 Carburant et huile moteur utilisés
- 8. Dispositifs de sécurité
- 9. Conseils d’utilisation
- 10. Mise en service de l’appareil
- 11. Entretien
- 12. Transport
- 13. Comment limiter l’usure et éviter les dommages
- 14. Protection de l’environnement
- 15. Pièces de rechange courantes
- 16. Déclaration de conformité CE du fabricant
- 17. Caractéristiques techniques
- 18. Recherche des pannes
- 19. Feuille d’entretien
- 1. Inhoudsopgave
- 2. Over deze gebruiksaanwijzing
- 3. Beschrijving van het apparaat
- 4. Voor uw veiligheid
- 5. Toelichting van de symbolen
- 6. Leveringsomvang
- 7. Apparaat klaarmaken voor gebruik
- 8. Veiligheidsvoorzieningen
- 9. Aanwijzingen voor werken
- 10. Apparaat in gebruik nemen
- 11. Onderhoud
- 12. Transport
- 13. Slijtage minimaliseren en schade voorkomen
- 14. Milieubescherming
- 15. Standaard reserveonderdelen
- 16. CE- conformiteitsverklaring van de fabrikant
- 17. Technische gegevens
- 18. Defectopsporing
- 19. Onderhoudsschema
- 1. Indice
- 2. Avvertenze sulle istruzioni per l’uso
- 3. Descrizione dell’apparecchio
- 4. Per la vostra sicurezza
- 5. Descrizione dei simboli
- 6. Equipaggiamento fornito
- 7. Preparazione per la messa in servizio dell'apparecchio
- 7.1 Informazioni generali
- 7.2 Montaggio del manubrio
- 7.3 Aggancio e sgancio del cavo di avviamento
- 7.4 Chiusura della parte superiore del manubrio
- 7.5 Assemblaggio del cesto raccolta erba
- 7.6 Sgancio e aggancio del cesto di raccolta erba
- 7.7 Regolazione centralizzata altezza di taglio
- 7.8 Carburante e olio motore
- 8. Dispositivi per la sicurezza
- 9. Istruzioni di lavoro
- 10. Messa in servizio dell'apparecchio
- 11. Manutenzione
- 12. Trasporto
- 13. Minimizzare l’usura ed evitare danni
- 14. Tutela dell’ambiente
- 15. Ricambi standard
- 16. Dichiarazione di conformità CE del costruttore
- 17. Dati tecnici
- 18. Risoluzione guasti
- 19. Programma Assistenza Tecnica
- 1. Índice
- 2. Acerca de este manual de instrucciones
- 3. Descripción del equipo
- 4. Para su seguridad
- 5. Descripción de los símbolos
- 6. Contenido del suministro
- 7. Preparar el equipo para el servicio
- 8. Dispositivos de seguridad
- 9. Indicaciones para el trabajo
- 10. Poner el equipo en servicio
- 11. Mantenimiento
- 12. Transporte
- 13. Reducir el desgaste y prevenir daños
- 14. Protección del medio ambiente
- 15. Piezas de recambio habituales
- 16. Declaración de conformidad CE del fabricante
- 17. Datos técnicos
- 18. Localización de anomalías
- 19. Plan de mantenimiento
- 1. Índice
- 2. Sobre este manual de utilização
- 3. Descrição do aparelho
- 4. Para sua segurança
- 5. Descrição de símbolos
- 6. Fornecimento
- 7. Preparar o aparelho para o funcionamento
- 8. Dispositivos de segurança
- 9. Instruções para trabalhar
- 10. Colocar o aparelho em funcionamento
- 11. Manutenção
- 12. Transporte
- 13. Minimização do desgaste e prevenção de danos
- 14. Protecção do meio ambiente
- 15. Peças de reposição comuns
- 16. Declaração de conformidade CE do fabricante
- 17. Dados técnicos
- 18. Localização de falhas
- 19. Plano de manutenção
- 1. Innholdsfortegnelse
- 2. Om denne bruksanvisningen
- 3. Maskinbeskrivelse
- 4. For din egen sikkerhet
- 5. Symbolforklaring
- 6. Produktkomponenter
- 7. Gjøre maskinen klar for bruk
- 8. Sikkerhetsutstyr
- 9. Informasjon om arbeid
- 10. Ta maskinen i bruk
- 11. Vedlikehold
- 12. Transport
- 13. Minimere slitasjen og unngå skader
- 14. Miljøvern
- 15. Vanlige reservedeler
- 16. Produsentens CE- samsvarserklæring
- 17. Tekniske data
- 18. Feilsøking
- 19. Serviceplan
- 1. Innehållsförteckning
- 2. Information om denna bruksanvisning
- 3. Maskinbeskrivning
- 4. För din säkerhet
- 5. Symbolbeskrivning
- 6. Leveransens omfattning
- 7. Göra maskinen klar för användning
- 8. Säkerhetsanordningar
- 9. Arbetsanvisningar
- 10. Ta maskinen i bruk
- 11. Underhåll
- 12. Transport
- 13. Minimera slitage och förhindra skador
- 14. Miljöskydd
- 15. Vanliga reservdelar
- 16. Tillverkarens CE- konformitetsdeklaration
- 17. Tekniska data
- 18. Felsökning
- 19. Serviceschema
- 1. Sisällysluettelo
- 2. Tätä käyttöopasta koskevia tietoja
- 3. Laitekuvaus
- 4. Turvallisuutesi vuoksi
- 5. Kuvasymbolien selitykset
- 6. Toimitussisältö
- 7. Laitteen valmistelu käyttöä varten
- 8. Turvalaitteet
- 9. Työskentelyohjeita
- 10. Laitteen käyttöönotto
- 11. Huolto
- 12. Kuljetus
- 13. Kulumisen minimointi ja vaurioiden ehkäisy
- 14. Ympäristönsuojelu
- 15. Varaosat
- 16. Valmistajan CE- vaatimustenmukaisuusvaku utus
- 17. Tekniset tiedot
- 18. Vianetsintä
- 19. Huolto-ohjelma
- 1. Indholdsfortegnelse
- 2. Om denne betjeningsvejledning
- 3. Beskrivelse af maskinen
- 4. Sikkerhed
- 5. Symbolforklaring
- 6. Medfølgende dele
- 7. Klargøring af maskinen
- 8. Sikkerhedsanordninger
- 9. Arbejdsanvisninger
- 10. Tag maskinen i brug
- 11. Vedligeholdelse
- 12. Transport
- 13. Sådan minimerer du slid og undgår skader
- 14. Miljøbeskyttelse
- 15. Standardreservedele
- 16. Producentens EF- overensstemmelseserklærin g
- 17. Tekniske data
- 18. Fejlsøgning
- 19. Serviceplan
- 1. Obsah
- 2. K tomuto návodu na obsluhu
- 3. Popis stroja
- 4. Pre vašu bezpečnosť
- 5. Popis symbolov
- 6. Rozsah dodávky
- 7. Príprava stroja na prevádzku
- 8. Bezpečnostné zariadenia
- 9. Pokyny pre prácu
- 10. Uvedenie stroja do prevádzky
- 11. Údržba
- 12. Preprava stroja
- 13. Opatrenia na minimalizovanie opotrebovania a na zabránenie vzniku škôd
- 14. Ochrana životného prostredia
- 15. Bežné náhradné diely
- 16. CE-Prehlásenie o zhode výrobcom
- 17. Technické údaje
- 18. Hľadanie porúch
- 19. Servisný plán
- 1. Obsah
- 2. O tomto Návodu k použití
- 3. Popis stroje
- 4. Pro vaši bezpečnost
- 5. Popis symbolů
- 6. Rozsah dodávky
- 7. Příprava stroje k provozu
- 8. Bezpečnostní zařízení
- 9. Pokyny pro práci
- 10. Uvedení stroje do provozu
- 11. Údržba
- 12. Přeprava stroje
- 13. Opatření pro minimalizování opotřebení a zabránění vzniku škod
- 14. Ochrana životního prostředí
- 15. Běžné náhradní díly
- 16. CE - Prohlášení výrobce o shodě
- 17. Technické údaje
- 18. Hledání závad
- 19. Servisní plán
- 1. Περιεχόμενα
- 2. Σχετικά με αυτές τις οδηγίες χρήσης
- 3. Περιγραφή εργαλείου
- 4. Για τη δική σας ασφάλεια
- 5. Περιγραφή συμβόλων
- 6. Περιεχόμενα συσκευασίας
- 7. Προετοιμασία του μηχανήματος για χρήση
- 8. Συστήματα ασφαλείας
- 9. Υποδείξεις για την εργασία
- 10. Θέση του εργαλείου σε λειτουργία
- 11. Συντήρηση
- 12. Μεταφορά
- 13. Ελαχιστοποίηση φθορών και αποφυγή βλαβών
- 14. Προστασία περιβάλλοντος
- 15. Συνηθισμένα ανταλλακτικά
- 16. Πιστοποιητικό συμβατότητας CE του κατασκευαστή
- 17. Τεχνικά στοιχεία
- 18. Εντοπισμός βλαβών
- 19. Πρόγραμμα συντήρησης
0478 111 9922 B - EN
30
Petrol must only be stored in appropriate,
tested containers (canisters). Always
screw on the fuel tank and canister caps
properly and tightly. Defective caps must
be replaced for safety reasons.
Never use beverage bottles or similar for
disposal or storage of fuels and lubricants.
Persons, particularly children, could be
tempted to drink out of them.
Keep petrol away from sparks,
naked flames, pilot lights, heat
sources, and other ignition
sources. Do not smoke!
Refill the tank out-of-doors and do not
smoke during refilling.
Before refilling the tank, stop the engine
and allow it to cool.
Refilling with petrol must be performed
before the engine is started. When the
engine is running or is hot, the tank cap
must not be removed and the tank must
not be refilled with petrol.
Do not fill the fuel tank completely, but fill
to approx. 4 cm below the edge of the filler
neck so that the fuel has room to expand.
If petrol is spilled, the engine must only be
started after the petrol-contaminated area
has been cleaned. All attempts at starting
must be avoided until the petrol fumes
have dispersed (wipe dry).
Any spilt fuel must be wiped up
immediately.
Clothing must be changed if it comes into
contact with petrol.
Never store the machine with petrol in the
tank inside a building. The resulting petrol
fumes could come into contact with naked
flames or sparks and could be ignited.
If it is necessary to drain the tank, this must
be done out of doors.
4.3 Clothing and equipment
Always wear sturdy footwear
with high-grip soles when
working. Never work barefoot
or, for example, in sandals.
Also always wear sturdy gloves
and tie up and secure long hair
(headscarf, cap, etc.) when
performing maintenance and
cleaning work or when transporting the
machine.
Wear suitable safety glasses
when sharpening the mowing
blade.
Always wear long trousers and
tight-fitting clothing when operating the
machine.
Never wear loose clothes which may
become caught on moving parts (control
levers) – do not wear jewellery, ties or
scarves.
4.4 Transporting the machine
Always wear gloves in order to prevent
injuries due to sharp-edged and hot
components.
Do not transport the machine with the
engine running. Switch off the engine, let
the blades come to a standstill and remove
the spark plug socket prior to transport.
Only transport the machine once the
engine has cooled down and with an
empty fuel tank.
Use suitable loading aids (loading ramps,
lifters).
Secure the machine and any machine
components being transported (e.g. grass
catcher box) on the load floor using
fastening material of adequate size (belts,
ropes, etc.).
Avoid contact with the mowing blade when
lifting and carrying the machine.
Observe the information in the section
"Transport". It describes how to lift and
lash the machine. (Ö 12.)
When transporting the machine, always
observe regional legislation, especially
regarding load security and the transport
of objects on load floors.
4.5 Before operation
Make sure that only persons who are
familiar with the instruction manual are
permitted to use the machine.
Check the fuel system (particularly visible
parts such as e.g. tank, tank cap, hose
connections) before operating the
machine. In the event of any leaks or
damage, do not start the engine – fire
hazard!
Have the machine repaired by a specialist
dealer prior to operation.
Observe the local regulations regarding
permitted operating times for gardening
power tools with combustion engines or
electric motors.
Carefully inspect the complete area on
which the machine is to be used and
remove any stones, sticks, wires, bones
and other foreign objects which could be
thrown up by the machine. Obstacles (e.g.
tree stumps, roots) can be easily
overlooked in long grass.