Operation Manual
Table Of Contents
- 1. Inhaltsverzeichnis
- 2. Zu dieser Gebrauchsanleitung
- 3. Gerätebeschreibung
- 4. Zu Ihrer Sicherheit
- 5. Symbolbeschreibung
- 6. Lieferumfang
- 7. Gerät betriebsbereit machen
- 8. Sicherheitseinrichtungen
- 9. Hinweise zum Arbeiten
- 10. Gerät in Betrieb nehmen
- 11. Wartung
- 12. Transport
- 13. Verschleiß minimieren und Schäden vermeiden
- 14. Umweltschutz
- 15. Übliche Ersatzteile
- 16. CE- Konformitätserklärung des Herstellers
- 17. Technische Daten
- 18. Fehlersuche
- 19. Serviceplan
- 1. Table of contents
- 2. Notes on the instruction manual
- 3. Machine overview
- 4. For your safety
- 5. Description of symbols
- 6. Standard equipment
- 7. Preparing the machine for operation
- 8. Safety devices
- 9. Notes on working with the machine
- 10. Operating the machine
- 11. Maintenance
- 12. Transport
- 13. Minimising wear and preventing damage
- 14. Environmental protection
- 15. Standard spare parts
- 16. CE - manufacturer's declaration of conformity
- 17. Technical specifications
- 18. Troubleshooting
- 19. Service schedule
- 1. Sommaire
- 2. À propos de ce manuel d’utilisation
- 3. Description de l’appareil
- 4. Consignes de sécurité
- 5. Signification des pictogrammes
- 6. Contenu de l’emballage
- 7. Préparation de l’appareil
- 7.1 Généralités
- 7.2 Montage du guidon
- 7.3 Accrochage et décrochage du câble de démarrage
- 7.4 Basculement de la partie supérieure du guidon
- 7.5 Assemblage du bac de ramassage
- 7.6 Décrochage et accrochage du bac de ramassage
- 7.7 Réglage centralisé de la hauteur de coupe
- 7.8 Carburant et huile moteur utilisés
- 8. Dispositifs de sécurité
- 9. Conseils d’utilisation
- 10. Mise en service de l’appareil
- 11. Entretien
- 12. Transport
- 13. Comment limiter l’usure et éviter les dommages
- 14. Protection de l’environnement
- 15. Pièces de rechange courantes
- 16. Déclaration de conformité CE du fabricant
- 17. Caractéristiques techniques
- 18. Recherche des pannes
- 19. Feuille d’entretien
- 1. Inhoudsopgave
- 2. Over deze gebruiksaanwijzing
- 3. Beschrijving van het apparaat
- 4. Voor uw veiligheid
- 5. Toelichting van de symbolen
- 6. Leveringsomvang
- 7. Apparaat klaarmaken voor gebruik
- 8. Veiligheidsvoorzieningen
- 9. Aanwijzingen voor werken
- 10. Apparaat in gebruik nemen
- 11. Onderhoud
- 12. Transport
- 13. Slijtage minimaliseren en schade voorkomen
- 14. Milieubescherming
- 15. Standaard reserveonderdelen
- 16. CE- conformiteitsverklaring van de fabrikant
- 17. Technische gegevens
- 18. Defectopsporing
- 19. Onderhoudsschema
- 1. Indice
- 2. Avvertenze sulle istruzioni per l’uso
- 3. Descrizione dell’apparecchio
- 4. Per la vostra sicurezza
- 5. Descrizione dei simboli
- 6. Equipaggiamento fornito
- 7. Preparazione per la messa in servizio dell'apparecchio
- 7.1 Informazioni generali
- 7.2 Montaggio del manubrio
- 7.3 Aggancio e sgancio del cavo di avviamento
- 7.4 Chiusura della parte superiore del manubrio
- 7.5 Assemblaggio del cesto raccolta erba
- 7.6 Sgancio e aggancio del cesto di raccolta erba
- 7.7 Regolazione centralizzata altezza di taglio
- 7.8 Carburante e olio motore
- 8. Dispositivi per la sicurezza
- 9. Istruzioni di lavoro
- 10. Messa in servizio dell'apparecchio
- 11. Manutenzione
- 12. Trasporto
- 13. Minimizzare l’usura ed evitare danni
- 14. Tutela dell’ambiente
- 15. Ricambi standard
- 16. Dichiarazione di conformità CE del costruttore
- 17. Dati tecnici
- 18. Risoluzione guasti
- 19. Programma Assistenza Tecnica
- 1. Índice
- 2. Acerca de este manual de instrucciones
- 3. Descripción del equipo
- 4. Para su seguridad
- 5. Descripción de los símbolos
- 6. Contenido del suministro
- 7. Preparar el equipo para el servicio
- 8. Dispositivos de seguridad
- 9. Indicaciones para el trabajo
- 10. Poner el equipo en servicio
- 11. Mantenimiento
- 12. Transporte
- 13. Reducir el desgaste y prevenir daños
- 14. Protección del medio ambiente
- 15. Piezas de recambio habituales
- 16. Declaración de conformidad CE del fabricante
- 17. Datos técnicos
- 18. Localización de anomalías
- 19. Plan de mantenimiento
- 1. Índice
- 2. Sobre este manual de utilização
- 3. Descrição do aparelho
- 4. Para sua segurança
- 5. Descrição de símbolos
- 6. Fornecimento
- 7. Preparar o aparelho para o funcionamento
- 8. Dispositivos de segurança
- 9. Instruções para trabalhar
- 10. Colocar o aparelho em funcionamento
- 11. Manutenção
- 12. Transporte
- 13. Minimização do desgaste e prevenção de danos
- 14. Protecção do meio ambiente
- 15. Peças de reposição comuns
- 16. Declaração de conformidade CE do fabricante
- 17. Dados técnicos
- 18. Localização de falhas
- 19. Plano de manutenção
- 1. Innholdsfortegnelse
- 2. Om denne bruksanvisningen
- 3. Maskinbeskrivelse
- 4. For din egen sikkerhet
- 5. Symbolforklaring
- 6. Produktkomponenter
- 7. Gjøre maskinen klar for bruk
- 8. Sikkerhetsutstyr
- 9. Informasjon om arbeid
- 10. Ta maskinen i bruk
- 11. Vedlikehold
- 12. Transport
- 13. Minimere slitasjen og unngå skader
- 14. Miljøvern
- 15. Vanlige reservedeler
- 16. Produsentens CE- samsvarserklæring
- 17. Tekniske data
- 18. Feilsøking
- 19. Serviceplan
- 1. Innehållsförteckning
- 2. Information om denna bruksanvisning
- 3. Maskinbeskrivning
- 4. För din säkerhet
- 5. Symbolbeskrivning
- 6. Leveransens omfattning
- 7. Göra maskinen klar för användning
- 8. Säkerhetsanordningar
- 9. Arbetsanvisningar
- 10. Ta maskinen i bruk
- 11. Underhåll
- 12. Transport
- 13. Minimera slitage och förhindra skador
- 14. Miljöskydd
- 15. Vanliga reservdelar
- 16. Tillverkarens CE- konformitetsdeklaration
- 17. Tekniska data
- 18. Felsökning
- 19. Serviceschema
- 1. Sisällysluettelo
- 2. Tätä käyttöopasta koskevia tietoja
- 3. Laitekuvaus
- 4. Turvallisuutesi vuoksi
- 5. Kuvasymbolien selitykset
- 6. Toimitussisältö
- 7. Laitteen valmistelu käyttöä varten
- 8. Turvalaitteet
- 9. Työskentelyohjeita
- 10. Laitteen käyttöönotto
- 11. Huolto
- 12. Kuljetus
- 13. Kulumisen minimointi ja vaurioiden ehkäisy
- 14. Ympäristönsuojelu
- 15. Varaosat
- 16. Valmistajan CE- vaatimustenmukaisuusvaku utus
- 17. Tekniset tiedot
- 18. Vianetsintä
- 19. Huolto-ohjelma
- 1. Indholdsfortegnelse
- 2. Om denne betjeningsvejledning
- 3. Beskrivelse af maskinen
- 4. Sikkerhed
- 5. Symbolforklaring
- 6. Medfølgende dele
- 7. Klargøring af maskinen
- 8. Sikkerhedsanordninger
- 9. Arbejdsanvisninger
- 10. Tag maskinen i brug
- 11. Vedligeholdelse
- 12. Transport
- 13. Sådan minimerer du slid og undgår skader
- 14. Miljøbeskyttelse
- 15. Standardreservedele
- 16. Producentens EF- overensstemmelseserklærin g
- 17. Tekniske data
- 18. Fejlsøgning
- 19. Serviceplan
- 1. Obsah
- 2. K tomuto návodu na obsluhu
- 3. Popis stroja
- 4. Pre vašu bezpečnosť
- 5. Popis symbolov
- 6. Rozsah dodávky
- 7. Príprava stroja na prevádzku
- 8. Bezpečnostné zariadenia
- 9. Pokyny pre prácu
- 10. Uvedenie stroja do prevádzky
- 11. Údržba
- 12. Preprava stroja
- 13. Opatrenia na minimalizovanie opotrebovania a na zabránenie vzniku škôd
- 14. Ochrana životného prostredia
- 15. Bežné náhradné diely
- 16. CE-Prehlásenie o zhode výrobcom
- 17. Technické údaje
- 18. Hľadanie porúch
- 19. Servisný plán
- 1. Obsah
- 2. O tomto Návodu k použití
- 3. Popis stroje
- 4. Pro vaši bezpečnost
- 5. Popis symbolů
- 6. Rozsah dodávky
- 7. Příprava stroje k provozu
- 8. Bezpečnostní zařízení
- 9. Pokyny pro práci
- 10. Uvedení stroje do provozu
- 11. Údržba
- 12. Přeprava stroje
- 13. Opatření pro minimalizování opotřebení a zabránění vzniku škod
- 14. Ochrana životního prostředí
- 15. Běžné náhradní díly
- 16. CE - Prohlášení výrobce o shodě
- 17. Technické údaje
- 18. Hledání závad
- 19. Servisní plán
- 1. Περιεχόμενα
- 2. Σχετικά με αυτές τις οδηγίες χρήσης
- 3. Περιγραφή εργαλείου
- 4. Για τη δική σας ασφάλεια
- 5. Περιγραφή συμβόλων
- 6. Περιεχόμενα συσκευασίας
- 7. Προετοιμασία του μηχανήματος για χρήση
- 8. Συστήματα ασφαλείας
- 9. Υποδείξεις για την εργασία
- 10. Θέση του εργαλείου σε λειτουργία
- 11. Συντήρηση
- 12. Μεταφορά
- 13. Ελαχιστοποίηση φθορών και αποφυγή βλαβών
- 14. Προστασία περιβάλλοντος
- 15. Συνηθισμένα ανταλλακτικά
- 16. Πιστοποιητικό συμβατότητας CE του κατασκευαστή
- 17. Τεχνικά στοιχεία
- 18. Εντοπισμός βλαβών
- 19. Πρόγραμμα συντήρησης
![](/manual/viking/mb-253/operation-manual-english-german-french-dutch-italian-spanish-portuguese-norwegian-bokmal-swedish-finnish-danish-slovak-czech-modern-greek-1453/images/img-34.png)
0478 111 9922 B - EN
32
Always ensure good stability on slopes
and avoid mowing on excessively steep
slopes.
For safety reasons, the machine must not
be used on slopes with an inclination of
more than 25° (46.6%). Risk of injury!
A slope inclination of 25° corresponds to a
vertical height increase of 46.6 cm for a
100 cm horizontal distance.
In order to ensure an adequate oil supply
for the engine, the information in the
accompanying engine instruction manual
must be additionally observed when using
the machine on slopes.
Working:
Do not attempt to examine the
blade while the lawn mower is
operating. Never open the
discharge flap and/or remove the grass
catcher box when the mowing blade is
running. Rotating blades can cause injury.
Only operate the machine at walking
speed – never run when working with the
machine. Working quickly with the
machine increases the risk of injury due to
stumbling, slipping, etc.
Be particularly careful when turning the
machine around or pulling it towards you.
Risk of stumbling!
Use the machine with great care when
working near rubbish dumps, ditches and
embankments. In particular, ensure that
you maintain sufficient distance to such
danger areas.
Objects hidden in the turf (lawn sprinkler
systems, posts, water valves, foundations,
electrical wires, etc.) must be avoided.
Never run over any such foreign objects.
Beware of the cutting tool
running on for several seconds
before coming to a standstill.
Stop the engine, allow the work
tool to come to a complete
standstill and detach the spark plug socket
– before leaving the machine unattended,
– before re-filling the tank. Allow the
engine to cool down before re-filling the
tank.
Fire hazard!
– before remedying blockages, including
those in the discharge chute,
– before lifting or carrying the machine,
– before transporting the machine,
– before carrying out any work on the
mowing blade,
– before checking or cleaning the
machine or before carrying out any
other work (e.g. folding down the
handlebar) on it,
– after hitting a foreign object or if the
lawn mower begins to vibrate
excessively. In these cases check the
machine, in particular the cutting unit
(blade, blade shaft, blade fastening) for
damage and carry out the necessary
repairs before restarting and working
with the machine.
Switch off the engine
– When pushing the machine to and from
the area to be worked.
– Before pushing the machine onto an
area not covered with grass.
– Before opening the discharge flap or
removing the grass catcher box.
– When the machine has to be tilted for
transportation.
– Before adjusting the cutting height.
4.7 Maintenance and repairs
Before beginning cleaning,
adjustment, repair and
maintenance operations, park
the machine on firm, level
ground, stop the engine, allow it to cool
down and detach the spark plug socket.
Risk of injury!
Never place your hands or feet
above, underneath or on rotating
parts.
Risk of injury!
Strong vibrations are generally an
indication of a fault.
In particular, the lawn mower must
not be operated with a damaged or
bent crankshaft or mowing blade.
If you do not have the appropriate
expertise, have the necessary
repairs carried out by a specialist
dealer (VIKING recommends
VIKING specialist dealers).