Operation Manual

0478 192 9803 B - EN
28
Maximum coupling load = 40 kg
Maximum pulled load = 40 kg
11.9 Operating on slopes
The following points must be noted:
– Slopes must be driven on in a
longitudinal direction. Driving
transversely increases the danger of
tipping over.
– Changes of direction on slopes should
be avoided.
– If changes of direction cannot be
avoided, they must be executed with
particular care.
A pulled load of 40 kg at the trailer
coupling is achieved when pulling a
trailer with a weight of 250 kg on a
level surface.
Warning:
Before operating the machine on
slopes, the section "For your
safety" and especially "Instructions
for safe operation" must be
carefully read and observed.(Ö 4.)
For safety reasons, the machine
must not be used on slopes with an
incline of more than 10° (17.6%).
A slope inclination of 17.6%
corresponds to a vertical height
increase of 17.6 cm for a 100 cm
horizontal distance. In order to
ensure an adequate lubrication of
the engine, the information in the
accompanying engine instruction
manual must be additionally
observed when using the machine
on slopes.
Check the braking function before
operating the mower on slopes.