Operation Manual

ENNO
31
SVFIDAPL
0478 192 9803 B - EN
● Repeat this procedure on the other
side.
● Carefully and slowly set down the
mowing deck.
● Carefully set the cutting height
adjustment lever to the highest cutting
level.
Detaching the mowing deck at the
front:
Remove the cotter pin (5).
Lift the mowing deck slightly and detach it
from the front mowing deck mounting (3).
Carefully release the mowing deck.
● Repeat this procedure on the other
side.
● Carefully and slowly set down the
mowing deck.
Removing the mowing deck:
● Select the highest cutting
level. (Ö 8.12)
Pull out the mowing deck (1) with a slight
rotary motion at the side of the deflector
flap (11).
12.2 Installing the mowing deck
● Park the machine on level and solid
ground.
● Stop the engine. (Ö 11.3)
● Remove the ignition key.
● Engage the parking brake. (Ö 8.11)
● Turn the wheels to the left up to the
stop.
● Carefully set the cutting height
adjustment lever to the highest cutting
level. (Ö 8.12)
Pushing in the mowing deck:
● Position the V-belt so that it is
accessible at the opening in the V-belt
cover when the mowing deck is
installed.
Push the mowing deck (1) from the right
with the V-belt cover (6) at the front. Using
a slight rotary motion, position the mowing
deck centrally under the machine.
Attaching the mowing deck at the front:
● Select the lowest cutting level. (Ö 8.12)
Danger of pinching:
Before detaching, ensure that no
body parts (hands, fingers, feet,
etc.) are positioned directly under
the mowing deck.
After detaching the mowing deck,
the mowing deck mounting
automatically swings upwards.
Risk of injury:
Prior to all operations on the
mowing deck, carefully read and
observe the section "For your
safety". (Ö 4.)
Risk of injury:
The cutting height adjustment lever
is under tension when the mowing
deck is detached.
Exercise particular caution when
installing the mowing deck.