Operation Manual

ENNO
33
SVFIDAPL
0478 192 9803 B - EN
Fasten the retaining plate in place by
screwing in the screw (8). Tighten the
screw (8).
Tensioning V-belt:
● Select the lowest cutting level. (Ö 8.12)
Pull the tension spring (2) rearwards and
attach at the recess in the mowing
deck (1).
General
Risk of injury:
After installation of the mowing
deck, perform a visual check and
ensure correct installation.
Then perform an operational check.
Ensure that no other persons,
particularly children or animals are
in the vicinity. Only perform the
operational check when the user is
sitting on the machine.
13. Maintenance
Risk of injury:
Prior to all maintenance and
cleaning work and before transport
or immobilisation, it is essential to
remove the ignition key and put it in
a safe place, in order to prevent
inadvertent starting of the engine.
Risk of injury:
Always wear gloves. Never touch
the mowing blade before it has
come to a standstill.
Always allow the engine and
muffler to cool before carrying out
maintenance and cleaning work.
Before all maintenance and repair
work, carefully read and observe
the section "For your safety" and
especially the subsection
"Maintenance and repairs". (Ö 4.)
Risk of injury:
For safety reasons, maintenance
operations on the brakes are not
permitted.
Only allow adjustment and
maintenance operations to be
performed by a specialist dealer.
VIKING recommends
VIKING specialist dealers.