Operation Manual

ENNO
39
SVFIDAPL
0478 192 9803 B - EN
● Remove the ignition key and keep it in a
safe place.
● Select the lowest cutting level. (Ö 8.12)
Distance A=10mm.
13.8 Changing the wheels
In the case of damage (holes, cracks, cuts,
etc.) to the wheels, remove the damaged
wheel and take it to a specialised dealer.
Lifting and supporting the machine:
● Park the machine on firm and level
ground and secure it against rolling
away.
● Stop the engine. (Ö 11.3)
● Engage the parking brake. (Ö 8.11)
● Remove the ignition key and keep it in a
safe place.
Front axle: A = minimum 230 mm
Rear axle: B = minimum 210 mm
Risk of injury:
When lifting the machine, it must be
noted that it is very heavy (see
section "Technical specifications").
(Ö 20.)
If necessary, raise the machine with
the help of a second person or
using a jack (not included in the
standard equipment).
Secure the machine against rolling
away before lifting.
The brake only acts on the rear
wheels. Secure the machine
against rolling away when lifting the
rear axle.
Avoid damage to the machine
When supporting, ensure that only
the axle or the rear panel of the
machine contacts the trailer
coupling.
Only lift the machine at suitable
components (e.g. frame, rims,
axle). Never lift or support the
machine at plastic parts.