Operation Manual

ENNO
47
SVFIDAPL
0478 192 9803 B - EN
Remove the cap from the valve (1).
● Inflate the tyres to the following tyre
pressures using a suitable air pump
with gauge.
Front tyres:
1.0-1.2bar
Rear tyres:
0.8-1.0bar
13.24 Replacing headlamp bulbs
Bulb designation:
12V 10W BA9s
● Open the engine hood. (Ö 13.2).
Turn socket (1) through approx. 90° and it
pull out.
Press the bulb (2) in the direction of the
socket (1) and hold. Carefully turn the
bulb (2) and remove.
● Install the bulb in reverse order.
Push the socket (1) into the headlamp
housing.
● Close the engine hood. (Ö 13.3)
When replacing defective lamp
bulbs, always use headlamp bulbs
rated at 12V / 10W.