Operation Manual

0478 192 9803 B - EN
50
the safety, operating and maintenance
instructions is the sole responsibility of the
user.
This applies in particular to:
– Improper use of the product.
– Use of fuel and lubricants not approved
by VIKING (lubricants, petrol and
engine oil, see engine manufacturer's
specifications)
– Product modifications not approved by
VIKING.
– Use of tools or accessories which are
not approved or suitable for the
machine, or are of inferior quality.
– Use of the product for sporting or
competitive events.
– Resultant damage due to continued use
of the product with defective
components.
3. Maintenance operations
All operations listed in the section
"Maintenance" must be performed
regularly.
If these maintenance operations cannot be
carried out by the user, a specialist dealer
must be commissioned to perform them.
VIKING recommends that you have
maintenance operations and repairs
performed exclusively by a VIKING
specialist dealer.
VIKING specialist dealers regularly attend
training courses and are provided with
technical information.
If these operations are neglected, faults
may arise which are the responsibility of
the user.
These include:
– Corrosive and other resultant damage
caused by incorrect storage.
– Damage to the machine through the
use of inferior-quality spare parts.
– Damage due to untimely or inadequate
maintenance or damage due to
maintenance or repair work not
performed in the workshops of
specialist dealers.
We,
VIKING GmbH
Hans Peter Stihl-Strasse 5
A 6336 Langkampfen/Kufstein
declare that the machine,
lawn mower with driver's seat and
combustion engine (MT),
conforms to the following EU guidelines:
2000/14/EC, 97/68/EC, 2004/108/EC,
2006/66/EC, 2006/42/EC
The product has been developed in
conformance with the following standards:
EN 836, EN 60335
Applicable conformity assessment
procedure:
Appendix VIII (2000/14/EC)
Name and address of relevant, named
location:
TÜV SÜD
Industrie Service GmbH
Westendstraße 199
80686 Munich / Germany
Compilation and storage of technical
documentation:
Johann Weiglhofer
VIKING GmbH
19. CE - Manufacturer's
declaration of conformity
Manufacturer's
brand:
VIKING
Type: MT 4097.0 SX
MT 4097.0 S
MT 4112.0 S
MT 4112.0 SZ
Serial number 6165