Connector Kit Installation

5
Anti-tip Location
C
C
Cabinet
Rear
Floor
A
Cabinet
Opening
Dimension A = Cabinet opening minus the refrigerator height + 1-1/4" (3.2 cm)
Ex. - Cabinet opening height - 85”
Minimum refrigerator height (sitting on rollers) - 83 15/16”
A = 85” - 83-15/16” +1-1/4” = 2-5/16”
Anti-tip Bracket
There are 12 hole locations on the anti-tip bracket. Of those 12, at
least 4 places must be used.
NOTE: Number of fasteners must be suitable for load in order to
prevent tipping.
For example: wood screws into wall studs or masonry anchors if
attaching to stone, brick or concrete.
Anti-tip Bracket must be centered in cutout - side to side.