Installation Guide Guide d’Installation Dishwasher Door Panel Kits Ensembles de Panneaux de Porte Lave-vaisselle PDDP524 / RVDP324/TVDDP524/MPDDP542
Installation The unit comes with everything needed to make installing the door panel easy. n- (2) Custom Door Plugs w- (2) Plug Screws x- (2) Door Screws Provided Parts: Tools Needed: nwDrill w/ Phillips Driver Phillips Head Screwdriver x- x2 Step 1 Install the custom door plugs to the back of the door panel using the (2) plug screws n. 1 2 w.
Installation Step 2 Mount the panel door onto the dishwasher with the plastic custom door plugs installed in step one. 2 1 Step 3 Open the door and remove the cap inside the door at position 5 12 34 5 1 23 45 Step 4 Using the door screws provided, attach the panel to the dishwasher at position 5.
Installation Step 5 Check the position of the panel door and make sure it is aligned properly. Step 6 Check whether the bottom of the door hits the kickplate of the kitchen cabinet (A). If the door hits the kickplate, cut the necessary section out of the kickplate (B). Apply silicon or sealant to the cut edge of the kitchen cabinet kickplate or paint so it does not absorb moisture (C).
Installation L’appareil est livré avec tout le nécessaire pour faciliter l’installation du panneau de porte facile. n- (2) personnalisée porte bougies w- (2) bouchon vis x- (2) porte vis Pièces fournies: Outils nécessaires: nwPerceuse w / tournevis x- Cruciforme Phillips pilote x2 Étape 1 Installer vis la porte personnalisée se branche à l’arrière de la plaque à l’aide de la (2) fiche de vis. n. 1 5 w.
Installation Étape 2 Fixer le panneau sur le lave-vaisselle avec les bouchons en plastique de porte personnalisé installés dans la première étape. 2 1 Étape 3 Ouvrez la porte et retirer le capuchon a à l’intérieur la porte à la position 5. 12 34 5 1 23 45 Étape 4 Utilisant les vis fournies, fixer le panneau sur le lave-vaisselle en position 5.
Installation Étape 5 Vérifiez la position de la porte u panneau et assurez-vous qu’elle est correctement alignée. Étape 6 Vérifiez si le bas de la porte touche le garde-pieds de l’armoire de la cuisine (Figure A). Si la porte touche le gardepieds, coupez la partie nécessaire du garde-pieds (Figure B). Appliquez du silicone ou du mastic au bord coupé du gardepieds de l’armoire de la cuisine ou recouvrez-le d’une couche de peinture afin qu’il n’absorbe pas l’humidité.
Viking Range, LLC 111 Front Street Greenwood, Mississippi 38930 USA (662) 455-1200 For product information, call 1-888-845-4641 or visit the our web site at vikingrange.com Pour obtenir des informations sur le produit, appelez au 1 888 845-4641 ou visitez notre site Web (www.vikingrange.