Installation Instructions

11
3
4
2
Place duct cover top inside duct cover base and lower until desired
height is found. Mark height. Use the retaining nuts and bolts to fasten
in place from the inside and remove tape.
Slide duct cover in place and fasten from inside
canopy using the sheet metal screws provided.
1
2
Measure distance from ceiling to canopy.
Tape to avoid scratching.
Duct Cover (RVCH Classic Chimney Wall Hoods w/Standard Ventilator)
2
1
3
11
Slide filter front over front lip. Push filter rear up,
then slide back over rear lip.