Installation Instructions

13
CAUTION: Secure vent hood. Make sure mounting screws
are secured into framing using additional mounting screws
and wall anchors, if necessary.
Connect black to black, white to white, and the green/bare
wire under the green screw.
NOTE: Housing wiring must be properly installed for wiring to
be correct when wiring unit.
7
5/16”
n
ut driver
BLACK
BLACK
WHITE
WHITE
GREEN
BARE OR GREEN
8
5
Remove electrical box cover.
1
6
2
Flip hood over. Insert 6” of electrical wiring through
the top of vent hood and secure using wiring restrain. Refer
to local codes.
Replace electrical box cover. Make connection to breaker
box.
1
1
2
9
WARNING
TO REDUCE THE RISK OF FIRE, ELECTRIC
SHOCK, OR INJURY TO PERSONS, OBSERVE THE
FOLLOWING
• Use this unit only in the manner intended by the
manufacturer. If you have any questions, contact
the manufacturer.
• Before servicing or cleaning unit, switch power
off at service panel and lock service panel to
prevent power from being switched on
accidentally. When the service disconnecting
means cannot be locked, securely fasten a
prominent warning device, such as a tag, to the
service panel.