VIKING .
Congratulations Your purchase of a Liking hood attests to the importance you place don the quality and performance of the major appliances you use. With minimal care, as outlined in this quids, your naw had is designed to provide you with years of reliable service. Please take » few minutes to meal about its piper and efficient Use and care. This guide will provides you with the information you need t become familiar with your hood's care and operation. Your complete satisfaction is our ultimate goal.
Warnings com) WARNING TO REDUCE THE Risk OF A RANGE TOP GREASE FIRE: 1. Never leave surface units unattended at high setting. Boil overs cause smoking and greasy spillovers that may ignite. Heat oils slowly on low or medium settings. 2. Always turn hood ON when cooking at high heat or when 6. Crepes suttee, Cherries jubilee, gently. Grass should not be allowed to accumulate on fan or filter 4. Use proper pan size. Always use cookware appropriate for the size of the surface element.
Table of Contents Ratting Started Before Using Hood Coloraturas Est Sensor Thermostat. Product Controls/Operation Settings and Functions RBWHC Mode! Operation Product Care Cleaning and Maintenance Mesh Fitters Charcoal Filters Herod Canopy Name! Finish Stein less Steel Finish Light Bulbs Sen vice information Warranty Before Using Hood Although the hood is cleaned upon completion of the ngmfim¥n§~ you will probably need to clad your hood again after installation.
Settings and Functions RICH Mabel Operation Always wim on your hood before you bedim cooling 1o establish airflow in the kitchen. Alec [st the blower run for s few minutes fo clear the air after you tim off your cooking appliance. This will help esp the kitchen air cleaner Blows speed nab OFFEND switch Starts and stops the blower When muted on the blower will operate st the previous setting of the speed ‘control.
Cleaning and Maintenance Cleaning Mach Filters As air passe through the filter, grease particles collect on the stainless steel scream inside the filter. The filters should be examined periodically 1o assure that all surfaces and parts are clean. This unit is equipped with a1 amygdala. Once the Uit has beer in operation for 48 holism, the leers “FiT" will appear on the display. The fighters can then be washed in 2 dishwasher or n a asininity hot. soapy water.
Cleaning. and Maintenance Service Information Replacing the Light Bulbs When removing bulbs use an vane mitt to protect your hand 1 service is required, call your dasher or authorized service agency. In ease the but braise. The name of the authorized service agency can be obtained from the Halogen Lights dealer or distributor in your area, 1. Unscrew halogen bulls. Replace the bulb with a 120 volt, 50.wart halogen bulb. Have the following information readily available.