Use and Care Manual

29
Product Care
Replacing Oven Lights
WARNING
ELECTRICAL SHOCK HAZARD
Disconnect the electric power at the main fuse
or circuit breaker before replacing bulb.
WARNING
DO NOT touch bulb with bare hands. Clean off any
signs of oil from the bulb and handle with a soft cloth.
Halogen Lights
1. Unsnap glass light cover using a screwdriver in the access groove.
2. Firmly grasp light bulb and pull out.
3. Replace with halogen bulb using volt and wattage
requirements listed on glass cover.
4. Replace the light cover by snapping glass cover onto metal box.
5. Reconnect power at the main fuse or circuit breaker.
Power Failure
DO NOT attempt to use during a power failure. Unit will not function.
Troubleshooting
Problem Possible Cause and/or Remedy
Oven will not function.
Oven is not connected to electrical power.
Have electrician check power circuit breaker, wiring and fuse
s..
Oven does not operate in
self-clean cycle.
Door is not shut tight enough for automatic door latch to lock.
Oven is not clean after
self-clean cycle.
Temperature control knob not rotated all the way past clean
until it stops.
Broil does not work.
Temperature control knob is rotated too far past broil position.
Door will not open.
Oven is still in self-clean mode. If oven is
hot, door latch will release when a safe temperature is reached
Oven light will not work.
Light bulb is burned out.
Oven is not connected to power.