Flush Mount Installation Kit - Single Oven - Installation Instructions

F20701 EN

(092909J)

Viking Range Corporation

111 Front Street

Greenwood, Mississippi 38930 USA

(662) 455-1200

For product information,

call 1-888-VIKING1 (845-4641)

or visit the Viking Web site at

vikingrange.com

Viking Installation Guide

Designer Oven Accessory

Flush Mount Kit

PAGE 1
Viking Installation Guide Viking Range Corporation ® 111 Front Street Greenwood, Mississippi 38930 USA (662) 455-1200 For product information, call 1-888-VIKING1 (845-4641) or visit the Viking Web site at vikingrange.
PAGE 2
Removing Existing Trim Remove the two existing side trim pieces from the oven. There should be one trim piece on each side of the oven. NOTE: Keep the screws that are left after removing the existing side trim pieces. These screws will be used to install the flush mount accessory trim pieces.
PAGE 3
Installing Flush Mount Trim Installing Flush Mount Trim After removing the existing side trim pieces, install the two flush mount trim pieces to the oven. 1. Remove the protective plastic from the flush mount trim pieces. 2. Install the two flush mount trim pieces to the oven (see diagram for single and double oven installation.) DDOE Double Oven NOTE: There will be a designated right and left hand side flush mount trim piece.
PAGE 4
6 7