Owner's Manual

Clocks and Timers

Product Controls

To Set The Automatic Time Bake Program: (cont.)

3. Set the Oven Function selector to the desired function –

BAKE, CONVECTION BAKE, or TRUCONVEC™, etc.

4. Set the temperature control knob to the desired baking temperature.

5. The Automatic Time Bake program is now set.

Note: The display will continue to show the amount of bake time that was programmed (this will remain until the

programmed start time is reached). You can return the display to clock mode by pressing the “CLOCK” button. Notice that

a small clock will be displayed in the upper right corner to indicate that a program is in progress. Switch back to the timer

mode by pressing the “BAKE TIME” button.

6. When the specified time is reached, the oven will automatically turn on. It will bake for the programmed amount of time

at the selected temperature.

Note: At 1 minute from the end of the specified bake program, the oven timer will beep once. At the end of the specified

bake program, the oven will automatically turn off and the timer will sound a series of three beeps. This will continue until

the “START TIME” button is pressed. The display will then return to displaying the time.

Note: Setting the remaining duration time to :00 will cancel the Automatic Bake program.