Use and Care Manual

Clocks and Timers

5. The Automatic Time Bake program is now set.

Note: The display will continue to show the amount of bake time that was programmed (this will remain until the programmed start time is

reached). You can return the display to clock mode by pressing the “CLOCK” button. Notice that a small clock will be displayed in the upper

right corner to indicate that a program is in progress. Switch back to the timer mode by pressing the “BAKE TIME” button.

6. When the specified time is reached, the oven will automatically turn on. It will bake for the programmed amount of time at the

selected temperature.

Note: At 1 minute from the end of the specified bake program, the oven timer will beep once. At the end of the specified bake program, the

oven will automatically turn off and the timer will sound a series of three beeps. This will continue until the “START TIME” button is pressed.

The display will then return to displaying the time.

Note: Setting the remaining duration time to :00 will cancel the Automatic Bake program.